• Easy to use, head lamp mounted switch.
• A single, 10 watt, light level is available to brighten every riding condition. You may also ugrade the bulb to 15 watts or reduce it to 5 watts.
• Overnight, 9 hour, battery charging. A US 110 volt charger is included.
• A 4.1 amp hour, NiMh Multi-mount battery pack provides plenty of power in a lightweight frame mounted package.
• SurLok connectors are standard.
• You may mount this light to your helmet with the optional helmet mount (Part # NR-LS-4127) and optional 36 inch SurLok extension cable, (part # NR-LS-6462).
• You may add and run an optional tail light without activating the headlamp. We ran a tail light in flashing mode for 7 days and nights without a battery recharge!
• At 10 watts the Trail Rat 2 has a long two hour and twenty minute burn time.
• Includes an quick release, straight handlebar mount that allows you to pivot the headlamp up or down 45 degrees.
• A well designed, lightweight, simple to use and exceptionally durable lighting system that is widely used for all nighttime sports.
• Mounted weight, light, battery and switch, is just 20 ounces (570 grams).
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• Easy to use, head lamp mounted switch.
• A single, 10 watt, light level is available to brighten every riding condition. You may also ugrade the bulb to 15 watts or reduce it to 5 watts.
• Overnight, 9 hour, battery charging. A US 110 volt charger is included.
• A 6.0 amp hour, Sealed Lead Acid battery pack provides plenty of power in a lightweight bag with Velcro straps. Attaches to your frame, belt, hydration pack, etc.
• SurLok connectors are standard.
• You may mount this light to your helmet with the optional helmet mount (Part # NR-LS-4127) and optional 36 inch SurLok extension cable, (part # NR-LS-6462).
• You may add and run an optional tail light without activating the headlamp. We ran a tail light in flashing mode for 7 days and nights without a battery recharge!
• At 10 watts the RoadRat has a long two hour and forty-five minute burn time.
• Includes an quick release, straight handlebar mount that allows you to pivot the headlamp up or down 45 degrees.
• A well designed, lightweight, simple to use and exceptionally durable lighting system that is widely used for all nighttime sports.
• Mounted weight, light, battery and switch, is just 35.2 ounces (1,003 grams).
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• Easy to use, head lamp mounted switch.
• A single, 7.2 watt, light level is enough for most road riding riding conditions. You may also ugrade the bulb to 10 or 15 watts or reduce it to 5 watts.
• Powered by four 1.5 volt, C cell Alkaline batteries. Batteries and charger are NOT included.
• Uses a C cell battery tray that fits into the same Battery Bag used with the NiteRider Trail and Road Rat lights. Tray and the battery bag are included.
• You may also connect this light to a 6 volt multi-mount battery, a 6 volt flat pack battery or a 6 volt Sealed Lead Acid battery.
• SurLok connectors are standard.
• You may mount this light to your helmet with the optional helmet mount (Part # NR-LS-4127) and optional 36 inch SurLok extension cable, (part # NR-LS-6462).
• You may add and run an optional tail light without activating the headlamp. We ran a tail light in flashing mode for 7 days and nights without a battery recharge!
• At 7.2 watts the RoadRat has a long two hour burn time.
• Includes an quick release, straight handlebar mount that allows you to pivot the headlamp up or down 45 degrees.
• A well designed, lightweight, simple to use and durable lighting system that is widely used for night time road riding.
• Mounted weight, light, batteries and bag is just 20 ounces (570 grams).
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• Super bright! These 16 LED taillights really are visible in broad daylight.
• An excellent accessory that will increase your safety by forcing motorists to see you.
• One model with two different mounting options; rack or seatpost. Works with ALL NiteRider lights with SurLok connectors.
• Powered by the main system battery using a pass-through connector. May be run independently of the front head lamps.
• All connectors are provided with the taillight.
• These brillant taillights offer 360 degree visibility and are 20 to 30 times brighter than standard 5 LED rear lights.
• Light output is switchable between steady or flashing mode. We recommend the flashing mode for greatest visibility. A small, rear mounted push button switch controls off/on and flashing/steady modes.
• Cable, bracket and LED light weighs a mere 3 ounces, (84 grams)!.
• Uses virtually no battery power. We ran a tail light in flashing mode for 7 days and nights without a battery recharge!
• A well designed, sophisticated, feather light and durable rear light that is widely used for for all nighttime sports.
• Ideal for bicycling, motorcycling, running (clip the rack mount to your waist pack), skiing, snowboarding, inline skating and much more. You can purchase any NiteRider battery, get a matching charger and run this taillight from it. A headlamp is not required.
• 2002 to current NiteRider lights use SurLok connectors and just one model (NR-LS-6302) taillight. That model comes with rack and seatpost mounts and fits ALL NiteRider lights with SurLok connectors.
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• We stock a full range of individual parts and accessories for NiteRider lights. Click on the underlined text below to read more about replacement parts and accessories.
• Visit our NiteRider Batteries page to read about replacement batteries, chargers and adaptor cables for older systems.
• Visit our NiteRider Tail Lights page to read about super bright NiteRider LED tail lights.
• Visit our NiteRider Bulbs and Cables page to read about bulbs and extension cables.
• Visit our NiteRider Lamp Heads and Mounts page to read about lamp heads, headbands, helmet mounts, handlebar mounts and carry bags.

At Branford Bike we want you to be happy and satisfied with everything you purchase from us. We understand that sometimes you will need to return a product because it was not quite what you wanted. You may return anything you purchase from us within 60 days and unused, for an immediate exchange or refund.

Our Secure Order Form is easy to use. Simply fill in the boxes as you would for a traditional paper catalog order form.

Our Secure Order Form opens in a separate window that you may resize and tile behind our online catalog. After filling in your name, address and card information you may leave the order window open. Browse through our catalog and when you wish to purchase an item simply "cut and paste" the part number and description to the appropriate order form boxes.

When you are done shopping, submit your order for error checking, and then for processing. We will email you a confirmation within 10 minutes. Another, more detailed confirmation, will follow when we ship your order.

   
We accept Visa, Discover and MasterCard for payment.
We will NOT charge your card until your order is shipped.

To print this page in Netscape Navigator or Microsoft Explorer:
Choose File from the upper menu bar, click, and then click on Print...