• Easily mounts on your helmet or your handlebars. Mounting hardware is included for handlebars and your helmet.
• A removable, remote switch is pictured below. It may be attached to your handlebars or easily removed when you wish to use this light on your helmet.
• Exceptionally versatile; 4 light levels are available to brighten every riding condition. Choose from 3, 6, 10 or 15 watts.
• 10 step LED, headlamp mounted, fuel gauge with a low battery warning and notification that you have 15 minutes of reserve lighting left at 6 watts or 30 minutes at 3 watts. Larger, easier to read display, now resides in the headlamp switch.
• Comes with a new 3.5 hour international fast battery charging system and a 110 volt US power supply.
  If you live outside of North America simply use an adapter to convert the US two prong fitting to your local outlet configuration. The 6 volt, international fast charger will accept from 100 to 240 volts at 50 to 60 cycles per second.
• International 3.5 hour chargers automatically stop charging and flash a green LED, when your battery is full. It is impossible to overcharge your battery by leaving it plugged in too long with a 3.5 hour charger.
• Optional, in-vehicle 12 volt power inverter, NR-LS-6251, allows you to top off your NiteRider battery while driving to your riding location.
• New, longer lasting, lighter and more powerful, 4.5 amp hour, 27 Watt hour, 6 volt, nickel-metal-hydride multi-mount, smart battery. Fits in a jersey pocket, an hydration pack pocket, hangs on your handlebars or a frame tube. Pictured below, this battery pack weighs just 13 ounces, (369 grams) and is no bigger than a deck of cards. Now with an integrated computer chip that continuously monitors the battery's power level.
• Digital Soft Start prolongs bulb life by gently bringing the system to full power in 3 to 5 seconds.
• New SurLok cable connectors and high reliability halogen bulbs stand up to the most demanding conditions. SurLok connectors are NOT compatible with pre-2002 NiteRider lights.
• This lighting system automatically shuts down when the the battery is nearly depleted. This prevents full battery discharge and greatly enhances battery life.
• You may add and run an optional tail light without activating the headlamp. We ran a tail light in flashing mode for 7 days and nights without a battery recharge!
• The headlamp may be used in a safety flasher mode for greater visibility or as an SOS beacon in case you get lost.
• Includes an quick release, velcro strap, helmet mount that allows you to pivot the headlamp up or down.
• Includes an offset quick release handlebar mount that allows you to center this light over your handlebar stem. Offset mount may be adjusted to fit to the left or right of your stem.
• A well designed, sophisticated, feather light and durable lighting system that is widely used for for all nighttime sports.
• Mounted weight, light, battery and switch, is just 22 ounces (627 grams).
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• Easily mounts on your helmet or your handlebars. Mounting hardware is included for handlebars and your helmet.
• Easy to use, head lamp mounted switch.
• A single, 10 watt, light level is available to brighten every riding condition.
• Overnight battery charging. Optional European/Australian/Japanese or UK power supplys are available for an extra $45.00. We keep the US power supply that comes with the light.
• New SurLok cable connectors and high reliability halogen bulbs stand up to the most demanding conditions. SurLok connectors are NOT compatible with pre-2002 NiteRider lights.
• New, longer lasting, lighter and more powerful, 4.0 amp hour, 24 Watt hour, 6 volt, nickel-metal-hydride multi-mount, battery. Fits in a jersey pocket, an hydration pack pocket, hangs on your handlebars or a frame tube. Weighs just 13 ounces, (369 grams) and is no bigger than a deck of cards.
• You may add and run an optional tail light without activating the headlamp. We ran a tail light in flashing mode for 7 days and nights without a battery recharge!
• Includes an quick release, velcro strap, helmet mount that allows you to pivot the headlamp up or down.
• Includes an offset quick release handlebar mount that allows you to center this light over your handlebar stem. Offset mount may be adjusted to fit to the left or right of your stem.
• A well designed, lightweight, simple to use and exceptionally durable lighting system that is widely used for all nighttime sports.
• Mounted weight, light, battery and switch, is just 20 ounces (570 grams).
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• 5 hours 1 minute at 3 watts.
• 3 hours 2 minutes at 6 watts.
• 2 hours 25 minutes at 10 watts.
• 1 hour 45 minutes at 15 watts.

• 2 hours 20 minutes at 10 watts.

• Easily mounts on your helmet or your handlebars. Mounting hardware is included for your helmet ONLY.
• You may mount this light to your handlebars with the optional bar mount (part # NR-LS-1050 or NR-LS-1049), You may also connect this light to a 6 volt multi-mount battery (part # NR-LS-64) with an optional 12 inch SurLok extension cable, (part # NR-LS-6461).
• Exceptionally versatile; 4 light levels are available to brighten every riding condition. Choose from 3, 6, 10 or 15 watts.
• 10 step LED, headlamp mounted, fuel gauge with a low battery warning and notification that you have 15 minutes of reserve lighting left at 6 watts or 30 minutes at 3 watts. Larger, easier to read display, now resides in the headlamp switch.
• Comes with a new 3.5 hour international fast battery charging system and a 110 volt US power supply.
  If you live outside of North America simply use an adapter to convert the US two prong fitting to your local outlet configuration. The 6 volt, international fast charger will accept from 100 to 240 volts at 50 to 60 cycles per second.
• International 3.5 hour chargers automatically stop charging and flash a green LED, when your battery is full. It is impossible to overcharge your battery by leaving it plugged in too long with a 3.5 hour charger.
• Optional, in-vehicle 12 volt power inverter, NR-LS-6251, allows you to top off your NiteRider battery while driving to your riding location.
• New, longer lasting, lighter and more powerful, 4.1 amp hour, 25 Watt hour, 6 volt, nickel-metal-hydride flat-pack, smart battery. Fits in a jersey pocket or an hydration pack pocket. Pictured below, this battery pack is no bigger than a deck of cards. Now with an integrated computer chip that continuously monitors the battery's power level.
• Digital Soft Start prolongs bulb life by gently bringing the system to full power in 3 to 5 seconds.
• SurLok cable connectors and high reliability halogen bulbs stand up to the most demanding conditions.
• This lighting system automatically shuts down when the the battery is nearly depleted. This prevents full battery discharge and greatly enhances battery life.
• You may add and run an optional tail light without activating the headlamp. We ran a tail light in flashing mode for 7 days and nights without a battery recharge!
• The headlamp may be used in a safety flasher mode for greater visibility or as an SOS beacon in case you get lost.
• Includes an quick release, velcro strap, helmet mount that allows you to pivot the headlamp up or down.
• Comes with a rugged, zippered nylon, carrying and storage bag.
• A well designed, sophisticated, feather light and durable lighting system that is widely used for for all nighttime sports.
• Mounted weight, light, battery and switch, is just 19 ounces (545 grams).
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• Easily mounts on your helmet or your handlebars. Mounting hardware is included for your helmet ONLY.
• You may mount this light to your handlebars with the optional bar mount (part # NR-LS-1050 or NR-LS-1049), You may also connect this light to a 6 volt multi-mount battery (part # NR-LS-64) with an optional 12 inch SurLok extension cable, (part # NR-LS-6461).
• Easy to use, head lamp mounted switch.
• A single, 10 watt, light level is available to brighten every riding condition.
• Overnight battery charging. Optional, 3.5 hour international power supplys, are available for an extra $50.00. We keep the US power supply that comes with the light.
• New, longer lasting, lighter and more powerful, 4.1 amp hour, 25 Watt hour, 6 volt, nickel-metal-hydride flat-pack battery. Fits in a jersey pocket or an hydration pack pocket. Pictured below, this battery pack is no bigger than a deck of cards.
• You may add and run an optional tail light without activating the headlamp. We ran a tail light in flashing mode for 7 days and nights without a battery recharge!
• Includes an quick release, velcro strap, helmet mount that allows you to pivot the headlamp up or down.
• Comes with a rugged, zippered nylon, carrying and storage bag.
• A well designed, lightweight, simple to use and exceptionally durable lighting system that is widely used for all nighttime sports.
• Mounted weight, light, battery and switch, is just 19 ounces (545 grams).
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• 5 hours 1 minute at 3 watts.
• 3 hours 2 minutes at 6 watts.
• 2 hours 25 minutes at 10 watts.
• 1 hour 45 minutes at 15 watts.

• 2 hours 20 minutes at 10 watts.

• We stock a full range of individual parts and accessories for NiteRider lights. Click on the underlined text below to read more about replacement parts and accessories.
• Visit our NiteRider Batteries page to read about replacement batteries, chargers and adaptor cables for older systems.
• Visit our NiteRider Tail Lights page to read about super bright NiteRider LED tail lights.
• Visit our NiteRider Bulbs and Cables page to read about bulbs and extension cables.
• Visit our NiteRider Lamp Heads and Mounts page to read about lamp heads, headbands, helmet mounts, handlebar mounts and carry bags.

At Branford Bike we want you to be happy and satisfied with everything you purchase from us. We understand that sometimes you will need to return a product because it was not quite what you wanted. You may return anything you purchase from us within 60 days and unused, for an immediate exchange or refund.

Our Secure Order Form is easy to use. Simply fill in the boxes as you would for a traditional paper catalog order form.

Our Secure Order Form opens in a separate window that you may resize and tile behind our online catalog. After filling in your name, address and card information you may leave the order window open. Browse through our catalog and when you wish to purchase an item simply "cut and paste" the part number and description to the appropriate order form boxes.

When you are done shopping, submit your order for error checking, and then for processing. We will email you a confirmation within 10 minutes. Another, more detailed confirmation, will follow when we ship your order.

   
We accept Visa, Discover and MasterCard for payment.
We will NOT charge your card until your order is shipped.

To print this page in Netscape Navigator or Microsoft Explorer:
Choose File from the upper menu bar, click, and then click on Print...