• NiteRider produces several batteries that are used on current sytems or can be easily adapted for use on older, pre 2002 systems.
• All current NiteRider batteries use SurLok cable connectors. However, NiteRider produces three adapter cables that will allow you to match a new battery to older, pre-2002, lamp heads.
• Most NiteRider batteries use Nickel-Metal Hydride (NiMH) cells for lighter weight, longer burn times and faster charges. You may use these with older Nickel-Cadmium (NiCad) lights but you must use a newer NiMH charger. We also have NiCad batteries for older, NiCad lights.
• NiteRider NiMH 13.2/12 Volt batteries come in two sizes; Flat Pack or Bottle cage mounted. The Flat Pack does not have a micro chip built into it. The Flat pack comes with all NiteRider HID lights but can also be used with the Classic Plus light. The Bottle batteries come in two models and only in 13.2/12 volts. One model has a micro chip built into it and the other model does not.
• Newer digital Lights require a "Smart" battery which has a micro chip built into it.
• Older digital and all non-digital lights can use a "Smart" battery or a standard battery which does not have a micro chip built in to it.
• Confused about whether or not you need a "Smart" battery for your digital light? Check your old battery. If it says "Smart" on it, you need a "Smart" battery. If it does not say "Smart" a regular battery will work fine. If you have a 6 volt, single headlamp system check the battery cable tip. Smart batteries have a three conductor tip with a black band. Normal batteries have a two conductor tip that is black on the end. See our adapter cable photos for pictures of a two conducter tip, Model 6373 and a three conductor tip, model 6467.
• NiteRider 6 volt batteries are available in the Multi-Mount or Flat Pack style. Each style comes in two models. One has a micro chip built into it and is a "Smart" battery. The other lacks a micro chip and is considered a standard battery.

• We suggest using the 3.5 Hour or 5 hour Micro-Brute charger for "Smart" batteries and the standard 9 hour NiMH charger for standard, no micro chip, batteries. The 3.5 Hour and 5 Hour chargers will charge both "Smart" or standard NIMH batteries. The 9 hour charger only works with standard 6 volt, NiMH batteries.
• We have in stock a few of the very difficult to find NiteRider NiCad batteries with pre-2002 connectors. NiCad batteries may be charged with a NiteRider NiCad, 3.5 Hour or 5 Hour MicroBrute charger.
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• The NiteRider battery bag, will hold a flat pack 13.2 volt HID style battery or a sealed lead acid battery.
• The battery bag easily mounts to your belt, bicycle frame tube or hydratation pack with two Velcro straps. The battery bag is 2.5 inches tall, 1.5 inches wide and 4 inches long.

• NiteRider produces several batteries that are used on current sytems or can be easily adapted for use on older, pre 2002 systems.
• All current NiteRider batteries use SurLok cable connectors. However, NiteRider produces three adapter cables that will allow you to match a new battery to an older, pre-2002, lamp head or Micro Brute charger set.
• For 6 volt systems you simply need to match the silver male plug on the above adapter cables to what you are already using. A two conductor plug will have a black tip. A three conductor plug will have a black tip and a black ring slightly before the tip.
• Model 6373 Battery Adapter cable allows you to connect any current SurLok 6 volt battery to your pre-2002 6 volt, two conductor lamp head.
• Model 6467 Battery Adapter cable allows you to connect any current SurLok 6 volt battery to your 2002 6 volt, three conductor lamp head.
• Model 6466 Battery Adapter cable allows you to connect any current SurLok 12 volt battery to your pre-2002 12 volt lamp head.
• If you have a digital light you must use the "Smart" battery.
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• Current NiteRider lampheads and chargers can be easily adapted for use with older, pre 2002 batteries.
• All current NiteRider lampheads and chargers use SurLok cable connectors. However, NiteRider produces two adapter cables that will allow you to match an old battery to a current lamp head or charger.
• Model 6406 Battery Adapter cable allows you to connect any pre-2002 6 volt battery to your current 6 volt, SurLok lamp head or charger.
• Need an extension cable for your 2002 or older, Niterider 6 volt light? Purchase a NR-LS-6406 and a NR-LS-6373 or NR-LS-6467 battery adapter cables. Then simply use a current 12 or 36 inch SurLok Extension cable between the two battery adapter cables.
• Model 6405 Battery Adapter cable allows you to connect any pre-2002 13.2 volt battery to your current 13.2 volt, SurLok lamp head or charger.
• Need an extension cable for your pre-2002 Niterider 12/13.2 volt light? Purchase a NR-LS-6405 and a NR-LS-6466 battery adapter cables. Then simply use a current 12 or 36 inch SurLok Extension cable between the two battery adapter cables.
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• NiteRider 3.5 Hour chargers are sold as a set. The come with a charger box and an electrical cord as pictured below.
• NiteRider 3.5 Hour chargers will charge your NiteRider NiCad or NiMH battery to full capacity in 3.5 hours. Overcharging is impossible. The charger monitors the process and automatically steps down to pulse maintenance charging when your battery is full.
• 3.5 Hour chargers come in two models; 6 volt and a 12 volt. Both models that can be used anywhere in the world. Both models will charge NiCad or NiMH NiteRider batteries.

• The standard 9 hour, 6 volt, NiMH charger, pictured below, is for use in countries that adhere to the North American standard of 110 volts/60 cps electricity. It is designed to charge NiteRider standard (with out a micro chip) Multi-mount 6 volt batteries only.

• Use the NiteRider In Vehicle Charging Adapter with your 6 or 12 volt Micro Brute charger to top off your battery enroute to your event. Fits both SurLok and Pre-2002 Micro Brute 6 or 12 volt chargers.
• Use the NiteRider In Vehicle Inverter to get 110 volts alternating current from your car cigarette lighter. Use it to charge your NR battery via the 3.5 hour charger, run your computer, a small TV or even an electric shaver.
• NiteRider Sealed Lead Acid batteries use their own charger. They are listed below.
• We also have older chargers for pre-2002 NiteRider lights. Those are light specific so you do not have to worry about connectors, etc. All older chargers and sealed lead acid models are designed for North American 110 volt/60 cps electricity.
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• We stock a full range of individual parts and accessories for NiteRider lights. Click on the underlined text below to read more about replacement parts and accessories.
• Visit our NiteRider Batteries page to read about replacement batteries, chargers and adaptor cables for older systems.
• Visit our NiteRider Tail Lights page to read about super bright NiteRider LED tail lights.
• Visit our NiteRider Bulbs and Cables page to read about bulbs and extension cables.
• Visit our NiteRider Lamp Heads and Mounts page to read about lamp heads, headbands, helmet mounts, handlebar mounts and carry bags.

At Branford Bike we want you to be happy and satisfied with everything you purchase from us. We understand that sometimes you will need to return a product because it was not quite what you wanted. You may return anything you purchase from us within 60 days and unused, for an immediate exchange or refund.

Our Secure Order Form is easy to use. Simply fill in the boxes as you would for a traditional paper catalog order form.

Our Secure Order Form opens in a separate window that you may resize and tile behind our online catalog. After filling in your name, address and card information you may leave the order window open. Browse through our catalog and when you wish to purchase an item simply "cut and paste" the part number and description to the appropriate order form boxes.

When you are done shopping, submit your order for error checking, and then for processing. We will email you a confirmation within 10 minutes. Another, more detailed confirmation, will follow when we ship your order.

   
We accept Visa, Discover and MasterCard for payment.
We will NOT charge your card until your order is shipped.

To print this page in Netscape Navigator or Microsoft Explorer:
Choose File from the upper menu bar, click, and then click on Print...