• Ultra bright, metal halide bulb is complimented by three white LEDs. The LEDs have three modes: constant, flashing and SOS. The white LEDs can shine alone or in conjunction with the HID bulb.
• A halide arc light does not use a standard filament to create light, like halogen bulbs do. Instead it shoots an arc or continuous pulse of high voltage electricity across an open gap and through a gas cloud. The gas cloud emits a brillant white light than is far brighter than standard halogen type bulbs.
• Halide Arc lights are not only brighter but also more efficent than halogen lights. The FlameThrower uses a 4.1 AmpHour, 13.2 volt, Nickel Metal Hydride flat pack battery and has an amazing 4 to 6 hour burn time. A battery voltage indicator and LED fuel gauge is built into the headlamp unit, so you always know what your battery status is.
• The Cyclone Halide Arc bulb consumes only 12 watts of electricity but emits the same amount of light as a 50 watt halogen bulb. The Cyclone is four times more efficent than a standard halogen light!
• Three light levels , equivalent to a halogen 40, 45 and 50 watt bulb, provide 6, 5 and 4 hours of burn time respectively.

• Comes with a new 3.5 hour international fast battery charging system and a 110 volt US power supply.
  If you live outside of North America simply use an adapter to convert the US two prong fitting to your local outlet configuration. The 13.2 volt, international fast charger will accept from 100 to 240 volts at 50 to 60 cycles per second.
• International 3.5 hour chargers automatically stop charging and flash a green LED, when your battery is full. It is impossible to overcharge your battery by leaving it plugged in too long with a 3.5 hour charger.
• Optional, in-vehicle 12 volt power inverter, NR-LS-6251, allows you to top off your NiteRider battery while driving to your riding location.
• SurLok connectors are standard on the Cyclone.
• For safer daytime riding you may switch on the LEDs without activating the headlamp.
• You may add and run an optional tail light without activating the headlamp. We ran a tail light in flashing mode for 7 days and nights without a battery recharge!
• Includes a multi-position helmet mount with velcro straps.
• You may mount a Cyclone light to your handlebars with the optional bar mount (part # NR-LS-1050 or NR-LS-1049), You may also connect this light to a 13.2 volt bottle battery (part # NR-LS-6483) with an optional 12 inch SurLok extension cable, (part # NR-LS-6461).
• Comes with a rugged, zippered nylon, carrying and storage bag.
• A well designed, sophisticated and durable lighting system that is widely acclaimed by 24 hour race participants.
• Mounted weight, light, battery and switch, is just 34 ounces (965 grams).
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• Ultra bright, metal halide bulb.
• A halide arc light does not use a standard filament to create light, like halogen bulbs do. Instead it shoots an arc or continuous pulse of high voltage electricity across an open gap and through a gas cloud. The gas cloud emits a brillant white light than is far brighter than standard halogen type bulbs.
• Halide Arc lights are not only brighter but also more efficent than halogen lights. The Storm uses a 4.1 AmpHour, 13.2 volt, Nickel Metal Hydride pocket/hydration pack battery and has an amazing 4 hour burn time.
• The Storm Halide Arc bulb consumes only 10 watts of electricity but emits the same amount of light as a 40 watt halogen bulb. The Storm is four times more efficent than a standard halogen light!

• Comes with a new 3.5 hour international fast battery charging system and a 110 volt US power supply.
  If you live outside of North America simply use an adapter to convert the US two prong fitting to your local outlet configuration. The 13.2 volt, international fast charger will accept from 100 to 240 volts at 50 to 60 cycles per second.
• International 3.5 hour chargers automatically stop charging and flash a green LED, when your battery is full. It is impossible to overcharge your battery by leaving it plugged in too long with a 3.5 hour charger.
• Optional, in-vehicle 12 volt power inverter, NR-LS-6251, allows you to top off your NiteRider battery while driving to your riding location.
• SurLok connectors are standard on the Storm.
• For safer daytime riding you may switch on the optional tail light without activating the headlamp. We ran a tail light in flashing mode for 7 days and nights without a battery recharge!
• Includes a multi-position helmet mount with velcro straps.
• You may mount a Storm light to your handlebars with the optional bar mount (part # NR-LS-1050 or NR-LS-1049), You may also connect this light to a 13.2 volt bottle battery (part # NR-LS-6483) with an optional 12 inch SurLok extension cable, (part # NR-LS-6461).
• Comes with a rugged, zippered nylon, carrying and storage bag.
• A well designed, sophisticated and durable lighting system that is widely acclaimed by 24 hour race participants.
• Mounted weight, light, battery and switch, is just 34 ounces (965 grams).
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• We stock a full range of individual parts and accessories for NiteRider lights. Click on the underlined text below to read more about replacement parts and accessories.
• Visit our NiteRider Batteries page to read about replacement batteries, chargers and adaptor cables for older systems.
• Visit our NiteRider Tail Lights page to read about super bright NiteRider LED tail lights.
• Visit our NiteRider Bulbs and Cables page to read about bulbs and extension cables.
• Visit our NiteRider Lamp Heads and Mounts page to read about lamp heads, headbands, helmet mounts, handlebar mounts and carry bags.

At Branford Bike we want you to be happy and satisfied with everything you purchase from us. We understand that sometimes you will need to return a product because it was not quite what you wanted. You may return anything you purchase from us within 60 days and unused, for an immediate exchange or refund.

Our Secure Order Form is easy to use. Simply fill in the boxes as you would for a traditional paper catalog order form.

Our Secure Order Form opens in a separate window that you may resize and tile behind our online catalog. After filling in your name, address and card information you may leave the order window open. Browse through our catalog and when you wish to purchase an item simply "cut and paste" the part number and description to the appropriate order form boxes.

When you are done shopping, submit your order for error checking, and then for processing. We will email you a confirmation within 10 minutes. Another, more detailed confirmation, will follow when we ship your order.

   
We accept Visa, Discover and MasterCard for payment.
We will NOT charge your card until your order is shipped.

To print this page in Netscape Navigator or Microsoft Explorer:
Choose File from the upper menu bar, click, and then click on Print...