Branford Bike Online Catalog - Archival Edition
brought to you by the former owner of Branford Bike, Tim Brockett via his personal web site, TimsLife.Com
This is an archival edition of the Branford Bike web site from February 2006. Complete with product photos, prices, how to articles and technical specifications it is a treasure trove of accurate, detailed and historical information. Most of the products are no longer available but if you see something you would like, please contact the new owner of Branford Bike, Rodd Wagner via info@branfordbike.com.

Branford Bike was a huge part of my life for over 30 years. I enjoyed those years tremendously and Branford Bike was often a labor of love. I hope you enjoy browsing through the archival catalog. If your visit brings back pleasant memories please share them with me via e-mail at timbrockett@gmail.com.
Enjoy!
Tim Brockett
 
Branford Bike - Started in June, 1976 Branford Bike
129 Sagittarius Skyway, PO Box 1711, Emigrant, MT 59027 USA
Click on the underlined text to:
order online via our Secure Order Form and receive FREE...
or send us an email  with your questions or comments.
Phone Answering Hours M-W-F, 12 noon - 3 PM Mountain Time
Information: (203) 488-0482  FAX: (203) 643-8078
 
Campagnolo Road and Track Components
 

Campagnolo
Check out our Campagnolo Special Finds!
   
Campagnolo 2004 Components

Please note that Campagnolo has changed their 9 speed rear derailleurs in 2001. They are now modeled after their lighter and faster shifting, 2000 10 speed rear derailleurs. Campagnolo 2001 to current 9 speed rear derailleurs are NOT compatible with 1997 to 2000, 9 speed Ergo levers unless you upgrade to a new 2001 to current Ergo Cam. However, your current 9 speed system is NOT obsolete! All of the 2001 and 2002 9 speed cassettes and chains will work with all Campy 9 speed systems.
If you wish to upgrade your 1999 - 2000 9 speed system all you need to purchase is a current rear derailleur and a current Ergo lever 9 speed Ergo cam. Another cam will fit all 1992 to 1998 8 and 9 speed Ergo levers and allow them to be used with a 2001/02/03 9 speed rear derailleur.
Interestingly, Campagnolo's current 9 speed rear derailleur will shift fairly well with any Campy 8 speed Ergo, downtube or bar end shifter. We suggest replacing the 9 speed pulleys and pulley wheel bolts with 8 speed. The 8 speed bolts fit fine even though the heads are slightly taller than the new 9/10 speed pulley bolt heads. For best shifting we recommend upgrading to current 9 speed. But if you have a sizeable investment in Campy 8 speed then consider using a new 9 speed rear derailleur with your current 8 speed Campy shifters. We give the combination a 9 performance rating on a scale of 1 to 10, with 10 being the best.

   
 

Click on the Campy Logo and blue lines to return here

Campagnolo and Chris King Headsets

Headsets come in two styles; traditional threaded and newer threadless, and two sizes; 1 inch and 1 1/8 inch. If your fork column has threads cut into it you need a threaded style headset. If it is smooth then you need a threadless headset.
Measure the outside diameter of your fork column to determine whether you need a 1 inch or 1 1/8 size. Your headset must match the fork column diameter.
Stack height is the actual height or width of the lower and upper portions of your headset. To determine the stack height of your existing headset simply use a calipers to measure the height of your lower headset assembly and then your upper headset assembly. Add the two and you will have the stack height of your current headset.
When purchasing a new headset make sure that you get one with the same or shorter stack height. You can always add a spacer to take up any extra space. If you are installing a headset on a new fork we suggest cutting the fork 5 to 10 mm longer than needed. Adding a few spacers will put you in a more comfortable position and always allow you to install a taller stack headset in the future.
We added upper and lower bearing sizes for each headset. The upper is listed first. See our Bearings Section for replacement headset bearings.

 

HD-90-50 Record Threaded 1 inch, 38.5mm stack, 5/32 & 3/16, 104gr, Silver $84.88
HD-90-51 Record Thrdlss 1 inch, 24.5 stack, 5/32 & 3/16, 110gr, Silver $94.88
HD-90-52 Record Thrdlss 1 1/8 inch, 24.5 stack, 5/32 & 5/32, 118gr, Silver $109.88

HD-91-10 Record Thrdlss 1 inch Hiddenset, 5.9 mm stack, 5/32 & 5/32, 75gr, Black $74.88
HD-93-20 Record Thrdlss 1 1/8 inch Hiddenset, 5.9 mm stack, 1/8 & 1/8, 75gr, Black $87.88
HD-93-21 Record Thrdlss 1 1/8 inch Hiddenset,
Tall Top Carbon Cap, 12.0 mm stack, 1/8 & 1/8, 75gr, Black $99.88


HD-93-22 Chorus Thrdlss 1 1/8 inch Hiddenset, 5.9 mm stack, 1/8 & 1/8, 82gr, Black $54.88
HD-93-23 Chorus Thrdlss 1 1/8 inch Hiddenset,
Tall Top Alloy Cap, 12.0 mm stack, 1/8 & 1/8, 82gr, Black $54.88


HD-90-53 Chorus Threaded 1 inch, 38.5 stack, 5/32 & 3/16, 106gr, Silver $59.88
HD-90-54 Chorus Thrdlss 1 inch, 24.5 stck, 5/32 & 3/16, 111gr, Silver $69.88

Campagnolo Headset Parts

HD-97-10 3/16 of an inch Fork Crown Race for 1 inch Record, Chorus and Athena Headsets $29.88
HD-98-22 5/32 of an inch Fork Crown Race for 1 inch Hiddensets $19.88
HD-98-24A Black, Rubber Band, Seal for 1 and 1 1/8 lower headset cup $9.88
HD-98-16 5/32 of an inch Fork Crown Race for 1 1/8 inch Record Threadless Headset $29.88
HD-98-24 1/8 of an inch Fork Crown Race for Record/Chorus 1 1/8 inch Hiddensets $19.88
HD-98-11 Record Carbon Top Cap, Bolt and nut for 1 inch headset $49.88
HD-98-13 Record Carbon Top Cap, Bolt and nut for 1 1/8 inch headset $49.88
HD-98-12 Chorus Alloy Top Cap, Bolt and nut for 1 inch headset $39.88
HD-98-09 Chorus Alloy Top Cap, Bolt and nut for 1 1/8 inch headset $39.88
HD-98-10 Centering plastic cone for 1 inch headsets/hiddensets $7.88
HD-98-14 Centering plastic cone for 1 1/8 inch headsets $9.88
HD-98-14A Centering plastic cone for 1 1/8 inch hiddenset $9.88

Chris King Headsets - are being discontinued

We have used Chris King headsets for over twenty years with excellent results. Like Phil Wood bottom brackets, Chris King headsets spin smoother and last longer than anything else available. They come in a wide variety of bright colors and in several sizes and configurations to fit almost any bicycle. Chris King headsets used sealed cartridge bearings that are easy to open, clean and re-lube. Simply pop out the metal split ring, flush with WD-40 and regrease with Le Tour Whisper White. Spare parts are readily available and every Chris King headset comes with a 10 year warranty.

Chris King recently changed their pricing policy. Simply stated, Chris King will no longer sell their products to any dealer, who will not in turn resell them to riders, for the price that Chris King determines is fair. Chris King now requires all dealers to consent in writing that Chris King products will be advertised at a price that Chris King believes riders should pay. The new, fixed retail price is the same for all "Authorized" Chris King dealers and higher than what we currently charge. In a recent phone conversation a Chris King representative stated that if we did not sign the agreement they would no longer sell their products to us. Chris King has now banned their distributors from selling to us. As a result we are discontinuing all Chris King products. The following items are currently in stock and will be deleted as we sell out.

To read more about how there is an active and ongoing effort by multiple manufacturers in the bike industry to blacklist specific dealers so as to prevent them from selling their (the manufacturer's) product at a discounted price, click on the underlined text. Read about Shimano's effort to engage in price fixing and learn how you can help to eliminate this repugnant practice that reduces customer choice, raises the price riders pay and enriches the largest web/mail order outlets by eliminating price competition and denying products to smaller web/mail order retailers.

You may call Chris King at 800-523-6008 or email them at info@chrisking.com for further information or to let them know what you think.

HD-78-95 Chris King Threadless 1 1/8 inch, 31.4mm stck, 126gr, Bright Green $99.88

Chris King Spare Parts

HD-78-10 Chris King Threaded 1 inch grip nut conversion kit, Silver $39.88
HD-78-11 Chris King Threaded 1 inch grip nut conversion kit, Black $39.88
HD-78-12G Chris King Threaded 1 inch two nut conversion kit, Green $39.88
HD-78-12P Chris King Threaded 1 inch grip nut conversion kit, Purple $39.88
HD-78-13 Chris King Threadless 1 inch conversion kit, Silver $39.88
HD-78-14 Chris King Threadless 1 inch conversion kit, Black $39.88

Le Tour Headset Stack Spacers in Aluminum

TL-32-23A 1 inch, Silver, 1.5 mm $1.88ea
TL-32-24A 1 inch, Silver, 2.5 mm $1.88ea
TL-30-33A 1 inch, Silver, 5.0 mm $2.88ea
TL-30-33B 1 inch, Silver, 7.5 mm $2.88ea
TL-30-35A 1 inch, Silver, 10 mm $3.88ea
HD-31-65 1 inch, Silver, 15 mm $4.88ea
HD-31-66 1 inch, Silver, 20 mm $4.88ea
HD-31-67 1 inch, Silver, 40 mm $6.88ea

TL-32-23B 1 inch, Black, 1.5 mm $1.88ea
TL-32-25A 1 inch, Black, 2.5 mm $1.88ea
TL-30-34A 1 inch, Black, 5.0 mm $2.88ea
TL-31-36A 1 inch, Black, 7.5 mm $3.88ea
HD-31-70 1 inch, Black, 10 mm $3.88ea
HD-31-71 1 inch, Black, 15 mm $4.88ea
HD-31-72 1 inch, Black, 20 mm $4.88ea
HD-31-73 1 inch, Black, 40 mm $6.88ea

TL-32-23C 1 1/8 inch, Silver, 1.5 mm $1.88ea
TL-31-02A 1 1/8 inch, Silver, 2.5 mm $1.88ea
TL-31-03A 1 1/8 inch, Silver, 5.0 mm $2.88ea
TL-30-33C 1 1/8 inch, Silver, 7.5 mm $2.88ea
TL-31-35A 1 1/8 inch, Silver, 10 mm $3.88ea
HD-31-78 1 1/8 inch, Silver, 15 mm $4.88ea
HD-31-79 1 1/8 inch, Silver, 20 mm $4.88ea
HD-31-87 1 1/8 inch, Silver, 40 mm $6.88ea

TL-32-23C 1 1/8 inch, Black, 1.5 mm $1.88ea
TL-31-15A 1 1/8 inch, Black, 2.5 mm $1.88ea
TL-31-19A 1 1/8 inch, Black, 5.0 mm $2.88ea
TL-31-36C 1 1/8 inch, Black, 7.5 mm $3.88ea
HD-31-831 1/8 inch, Black, 10 mm $3.88ea
HD-31-84 1 1/8 inch, Black, 15 mm $4.88ea
HD-31-85 1 1/8 inch, Black, 20 mm $4.88ea
HD-31-88 1 1/8 inch, Black, 40 mm $6.88ea

TL-31-25A 1 1/4 inch, Silver, 2.5 mm $2.88ea
TL-31-26A 1 1/4 inch, Silver, 5.0 mm $3.88ea

Le Tour Headset Stack Spacers in Carbon Fiber

No logos on these top quality spacers; just clear coat over a natural carbon weave.

HD-99-12 1 inch, 3 mm $5.88ea
HD-99-14 1 inch, 5 mm $5.88ea
HD-99-16 1 inch, 10 mm $5.88ea
HD-99-18 1 inch, 15 mm $5.88ea
HD-99-20 1 inch, 20 mm $5.88ea
HD-99-20A 1 inch, 40 mm $8.88ea

HD-99-22 1 1/8 inch, 3 mm $5.88ea
HD-99-24 1 1/8 inch, 5 mm $5.88ea
HD-99-26 1 1/8 inch, 10 mm $5.88ea
HD-99-28 1 1/8 inch, 15 mm $5.88ea
HD-99-30 1 1/8 inch, 20 mm $5.88ea
HD-99-30A 1 1/8 inch, 40 mm $8.88ea

 

Cranksets

Campagnolo Cranksets and Replacement Crank Arms now have their own catalog section.

To visit the Crankset catalog section, click here

 

Bottom Brackets

Campagnolo bottom brackets now have their own catalog pages.

To visit the Bottom Bracket catalog section, click here

 

Pedals and Cleats


Pro-Fit Plus pedals come with floating cleats and all required hardware. Profit Plus pedals use the same 3 bolt shoe mounting pattern as LOOK. However the Pro-Fit Plus cleat is shaped differently than LOOK and it is not compatible with LOOK pedals.

PD-91-35 Record Ti , 265gr with cleats $269.88
PD-91-36 Chorus, 325gr with cleats $199.88
PD-92-42 Centaur, 325gr with cleats $179.88
PD-97-03 Long wearing, grey, 4 degrees of float, replacement cleats with out engaging hooks. Fits older Pro Fit and newer Pro Fit Plus pedals. $19.88pr
PD-97-04 Long wearing, black, 0 degrees of float, replacement cleats with out engaging hooks. Fits older Pro Fit and newer Pro Fit Plus pedals. $19.88pr

Would you like to use two pairs of cycling shoes with one set of Campagnolo pedals?
If so, you will need one set of cleats listed above, part number PD-97-0(fixed or floating) and one set of Pro Fit engaging hooks listed below, part number PD-97-05. The engaging hooks now come with a full cleat hardware set.


PD-97-05 Pro Fit and Pro Fit Plus Engaging Hooks, pair.
Comes complete with a full hardware set. $46.88pr

PD-97-10 Extra plates and bolts for hooks and cleats $22.88
PD-97-06 Replacement ProFit Pedal Springs $27.88pr
PD-97-01 Replacement ProFit Pedal HRE Chrome plates $36.88pr
LT-CL-S Le Tour Cleat Lube - simply rub on your cleats and pedals for easier, quicker and quieter release and entry. $9.88

 

Seat Posts and Binder Bolts

Campagnolo Carbon seat posts require a smoothly finished and perfectly round seat tube. Carefully check for metal burrs and sharp edges before installing. Carbon posts should slide into your frame smoothly. We suggest using the Campy 32 mm offset seat post clamp on frames that have removable seat post clamps. Use grease only if needed for lubrication; carbon posts are slippery and will not cold weld to any frame material.
The 250mm Carbon post has a 2mm wall thickness. The 350mm post is 33% stronger with a 3mm carbon wall thickness.


ST-90-30 Record Carbon 2003, 180 gr, 250mm, 27.2 diameter with a 31.8 mm clamp$129.88
ST-92-00 Record Carbon 2003, 208 gr, 250mm, 32.4 diameter with a 35 mm clamp$184.88

ST-91-07 31.6 to 31.9 mm Offset Campy removable seat post clamp for use with carbon posts. 22 gr. Tighten to 7.4 foot/pounds or 10 Newton/meters $29.88
ST-91-08 35.5 to 35.8 mm Offset Campy removable seat post clamp for use with carbon posts. 24 gr. Tighten to 7.4 foot/pounds or 10 Newton/meters $29.88

ST-94-04 Chorus Carbon, 195 gr, 250mm, 27.2 diameter $119.88
ST-92-04 Centaur, 230 gr, 250mm, 27.2 diameter $83.88

ST-98-10 Upper Clamp for ALL 1999 to Current Posts $39.88
ST-98-11 Lower Clamp for ALL 1999 to Current Posts $49.88
ST-98-12 Fixing Bolt and Washer for ALL 1999 to Current Posts $29.88

ST-98-00 Campagnolo steel seat tube binder bolt, 8 x 19mm. This fits frames that do NOT use a slip on seatpost clamp. $19.88

 

Front Derailleurs and Adapter Clamps

1 1/8”(28.6 mm), 1 1/4”(31.8 mm), 1 3/8”(35.0) mm or braze-on models

Campagnolo 10 speed front derailleurs may also be used for 5,6,7, 8 and 9 speed drive trains. Simply pop off the two piece plastic insert that is mounted on the front derailleur's outer cage plate. This widens the cage to allow thicker, 5,6,7,8 and 9 speed chains, to pass through.

Front Derailleur Capacity Explained

A front derailleur's capacity is simply the difference between the number of teeth on your largest and smallest chainring. For example if you have a 39/53 chainring combo, (53 - 39 = 14), you will need a front derailleur with a capacity of 14 teeth or more. If you have a 30/40/50 chainring combo, (50 - 30 = 20), you will need a front derailleur with a 20 tooth or more capacity.
You can use a triple front derailleur with a double chainring crankset. A double chainring front derailleur is lighter and will shift more quickly though.

FD-90-73 Record 2003, 8/9/10 speed, 2x, 35.0 mm Clamp-on, Capacity = 15 $99.88

FD-94-02 Record Carbon, 8/9/10 speed, 2x, 31.8 mm Clamp-on, Capacity = 15 $139.88
FD-94-03 Record Carbon, 8/9/10 speed, 2x, 35.0 mm Clamp-on, Capacity = 15 $139.88
FD-94-00 Record Carbon, 8/9/10 speed, 2x, Braze-on, Capacity = 15 $129.88
DP-30-31 Le Tour molded shim to fit a 31.8 mm front derailleur on a 28.6 mm seat tube. Just 8mm tall.$9.88

FD-92-02 Record 2003 10 speed, 3x (Triple) 31.8 mm, clamp on, Capacity = 23 $86.88
FD-92-03 Record 2003 10 speed, 3x (Triple) 35.0 mm, clamp on, Capacity = 23 $86.88
DP-30-31 Le Tour molded shim to fit a 31.8 mm front derailleur on a 28.6 mm seat tube Just 8mm tall.$9.88

FD-94-51 Record 2004+ 10 speed, 3x (Triple) 31.8 mm, clamp on, Capacity = 23 $99.88
FD-94-52 Record 2004+ 10 speed, 3x (Triple) 35.0 mm, clamp on, Capacity = 23 $99.88
FD-94-50 Record 2004+ Triple 10 speed, 3x (Triple) Braze-on, Capacity = 23 $89.88
DP-30-31 Le Tour molded shim to fit a 31.8 mm front derailleur on a 28.6 mm seat tube Just 8mm tall.$9.88

FD-90-77 Chorus 2003 8/9/10 speed, 2x, 35.0 mm Clamp-on, Capacity = 15 $82.88

FD-94-05 Chorus Alloy 8/9/10 speed, 2x, 31.8 mm Clamp-on, Capacity = 15 $99.88
FD-94-06 Chorus Alloy 8/9/10 speed, 2x, 35.0 mm Clamp-on, Capacity = 15 $99.88
FD-94-04 Chorus Alloy 8/9/10 speed, 2x, Braze-on, Capacity = 15 $95.88

FD-94-54 Chorus 10 speed, 3x (Triple) 31.8 mm, clamp on, Capacity = 23 $69.88
FD-94-55 Chorus 10 speed, 3x (Triple) 35.0 mm, clamp on, Capacity = 23 $69.88
FD-94-53 Chorus Triple 10 speed, 3x (Triple) Braze-on, Capacity = 23 $59.88
DP-30-31 Le Tour molded shim to fit a 31.8 mm front derailleur on a 28.6 mm seat tube Just 8mm tall.$9.88

FD-94-15 Centaur Silver 8/9/10 speed, 2x, 28.6 mm Clamp-on, Capacity = 15 $49.88
FD-94-16 Centaur Silver 8/9/10 speed, 2x, 31.8 mm Clamp-on, Capacity = 15 $49.88
FD-94-17 Centaur Silver 8/9/10 speed, 2x, 35.0 mm Clamp-on, Capacity = 15 $49.88
FD-94-14 Centaur Silver 8/9/10 speed, 2x, Braze-on, Capacity = 15 $45.88

FD-94-11 Centaur Grey 8/9/10 speed, 2x, 28.6 mm Clamp-on, Capacity = 15 $59.88
FD-94-12 Centaur Grey 8/9/10 speed, 2x, 31.8 mm Clamp-on, Capacity = 15 $59.88
FD-94-13 Centaur Grey 8/9/10 speed, 2x, 35.0 mm Clamp-on, Capacity = 15 $59.88
FD-94-10 Centaur Grey 8/9/10 speed, 2x, Braze-on, Capacity = 15 $54.88

FD-94-24 Centaur Silver 8/9/10 speed, 3x (Triple) 31.8 mm, clamp on, Capacity = 22 $59.88
FD-94-25 Centaur Silver 8/9/10 speed, 3x (Triple) 35.0 mm, clamp on, Capacity = 22 $59.88
FD-94-23 Centaur Silver 8/9/10 speed, 3x (Triple) Braze-on, Capacity = 22 $49.88
DP-30-31 Le Tour molded shim to fit a 31.8 mm front derailleur on a 28.6 mm seat tube Just 8mm tall.$9.88

FD-94-21 Centaur Grey 8/9/10 speed, 3x (Triple) 31.8 mm, clamp on, Capacity = 22 $69.88
FD-94-22 Centaur Grey 8/9/10 speed, 3x (Triple) 35.0 mm, clamp on, Capacity = 22 $69.88
FD-94-20 Centaur Grey 8/9/10 speed, 3x (Triple) Braze-on, Capacity = 22 $59.88
DP-30-31 Le Tour molded shim to fit a 31.8 mm front derailleur on a 28.6 mm seat tube Just 8mm tall.$9.88

FD-94-27 Veloce 8/9/10 speed, 2x, 31.8 mm Clamp-on, Capacity = 15 $44.88
FD-94-28 Veloce 8/9/10 speed, 2x, 35.0 mm Clamp-on, Capacity = 15 $44.88
FD-94-26 Veloce 8/9/10 speed, 2x, Braze-on, Capacity = 15 $45.88
DP-30-31 Le Tour molded shim to fit a 31.8 mm front derailleur on a 28.6 mm seat tube Just 8mm tall.$9.88

FD-91-35 Veloce 8/9 speed, 2x, Braze-on, Capacity = 15 $35.88

Top quality braze-on front derailleur adapter clamps

DP-62-02 1-1/4 inches (31.8mm) seat tube adapter clamp. Made by Shimano. $12.88
DP-62-00 1-3/8 inches (35.0mm) seat tube adapter clamp. Made by Shimano. $12.88

DP-98-05 Campagnolo 10 speed front derailler resin clip, needed for upgrades only $11.88

Bottom Bracket Cable Guides and Campy Pump Head Feet

FS-93-00 Campy Stainless Steel BB cable Guide and bolt $9.88
FS-96-00 Campy Nylon BB Cable Guide $7.88
FS-10-92 Shimano Torlon Blue BB Cable Guide $4.88
CA-PH-F Two rubber tips that fit the old and long discontinued Campagnolo brass frame pump head. $4.88

 

Rear Derailleurs, Jockey Wheels and Bolts

All Campagnolo 9 speed rear derailleurs may be used with Campagnolo 8 speed drive trains as long as you use a 9 speed chain. Most Campagnolo 8 speed rear derailleurs may be converted to 9 speed by switching the jockey wheels to 9 speed and replacing the longer, 8 speed jockey wheel bolts with shorter 9 speed bolts.
8 speed rear derailleurs will shift perfectly with Campagnolo 7 or 8 speed ErgoPower, bar end or downtube levers.

For best 9 speed drive train performance we recommend using 9 speed jockey wheels with a nine speed chain and a 9 speed cassette.

Campagnolo 10 speed and current 9 speed rear derailleurs have a completely different parallelogram than pre-2001 8 and 9 speed rear derailleurs. The new parallelogram provides exceptionally precise, fast and crisp shifting. Unfortunately, because of the new improved geometry, pre-2001, 9 speed rear derailleurs are not compatible with any current 9 speed Ergo Shifters unless you replace the shifter's Ergo Index gear. You can easily upgrade a current 9 speed rear derailleur to 10 speed by simply adding 10 speed pulley wheels. You may also retrograde any 10 speed rear derailleur to current 9 speed by simply switching the pulley wheels.

Current 9 speed rear derailleurs use 8.9 mm wide pulley wheels; 10 speed uses 8.5 mm pulley wheels to accommodate the thinner 10 speed chain. The black plastic wheels are identical; only the spacers are different. Both 9 and 10 speed rear derailleurs use the same length pulley bolts.

Campagnolo's current 9 or 10 speed rear derailleur will shift well with any Campy 8 speed Ergo, downtube or bar end shifters and a nine speed chain. The 10 speed rear derailleur requires 9 speed pulley wheels to work well with Campagnolo 8 speed shifters. For best shifting we recommend upgrading to current 9 speed. But if you have a sizeable investment in Campy 8 speed then consider using a current 9 or 10 speed rear derailleur with your 8 speed Campy shifters. We give the combination a 9 performance rating on a scale of 1 to 10, with 10 being the best.

Campy 10 speed rear derailleurs come in two cage lengths for use with double ring cranksets; normal is generally used with up to 26 tooth cassette cogs, medium for up to 29 tooth cassette cogs. The normal length cage measures 54 mm from the center of the upper pulley bolt to the center of the lower pulley bolt. The medium cage model comes in at 72 mm while the long cage is 90mm.
You may purchase a medium length cage assembly for your Record or Chorus 10 speed rear derailleur to convert it for use with 29 tooth cassette cogs. A third and longer cage, Record rear derailleur is designed for use with the 10 speed triple chain ring system. However you may convert it to 9 speed and use it with any Campagnolo 8 or 9 speed triple drivetrain.
For just $10.00 we can convert any new 10 speed rear derailleur, at the time of purchase, to 9 speed. $10.00 covers labor only; we keep the 10 speed pulley wheels.
All Campagnolo 9 and 10 speed rear derailleurs will shift up to a 29 tooth cassette cog. The reason for using a longer cage is to take up the extra chain slack when you are in a small ring and small cassette cog combination. See our Chain Wrap Capacity below for more details.

Daytona and Centaur components are identical; only the name has changed. Campy did not want to pay the royalty requested by the folks who trademarked the name Daytona. So Campagnolo changed the components name to Centaur.

Chain Wrap Capacity (CW) and Largest Rear Cog (LRC) Explained

Both Chain Wrap and Largest Rear Cog numbers are included with the Campagnolo rear derailleur descriptions below.
The Largest Rear Cog or LRC is simply the largest cog Campagnolo recommends for use with a specific rear derailleur.
Chain Wrap or CW is a simple calculation that will help you determine whether the rear derailleur you choose has a long enough cage to take up the chain slack in your drivetrain. The shorter the cage, the lighter and stiffer the derailleur and the quicker it will shift. Calculate Chain Wrap to get the greatest shifting performance.
To calculate Chain Wrap Capacity determine the difference between your largest and smallest chainring. Then determine the difference between your largest and smalles cog. Add the differences and you have Chain Wrap Capacity.
Example: 42/52 chainrings and a 12/21 cassette yields a CW of 19. 52 - 42 = 10. 21 - 12 = 9. 10 + 9 = 19. So, with a 42/52 chainring and a 12-21 cassette you would need a rear derailleur that has a Chain Wrap Capacity of at least 19.
For a 39/53 and a 13/26 combo you will need a minimum CW of 27. 53-39 = 14. 26 - 13 = 13. 14 + 13 = 27.
In practice the CW numbers are flexiable by one or two points. You could use a 39/53 with a 12-26 cassette with a CW of 27 even though the calculation calls for 28.

RD-90-07 Record Carbon 2003, Medium Cage, 10 speed, 193 gr, LRC = 29, CW = 36 $259.88
RD-92-00 Record Carbon 2003, Long Cage, Triple 10 speed, 205 gr, LRC = 29, CW = 39 $259.88
RD-92-00A Labor charge to convert any new 10 speed rear derailleur to current 9 speed $10.00

RD-94-00 Record Carbon 2004+, Short Cage, 10 speed, 187 gr, LRC = 26, CW = 27 $294.88
RD-94-01 Record Carbon 2004+, Medium Cage, 10 speed, 193 gr, LRC = 29, CW = 36 $294.88
RD-94-02 Record Carbon 2004+, Long Cage, Triple 10 speed, 205 gr, LRC = 29, CW = 39 $294.88
RD-92-00A Labor charge to convert any new 10 speed rear derailleur to current 9 speed $10.00

RD-94-03 Chorus Short Cage 2004+, 10 speed carbon body, 211 gr, LRC = 26, CW = 27 $229.88
RD-91-01 Chorus Short Cage, Current 9 speed alloy body, 211 gr, LRC = 26, CW = 27 $179.88
RD-94-04 Chorus Medium Cage 2004+, carbon body 10 speed, 215 gr, LRC = 29, CW = 36 $229.88
RD-93-20 Chorus Long Cage 2004+, Triple 10 speed carbon body, 225 gr, LRC = 29, CW = 39 $234.88
RD-92-00A Labor charge to convert any new 10 speed rear derailleur to current 9 speed $10.00

RD-92-06 Centaur Silver Short Cage, 9 speed, 226 gr, LRC = 29, CW = 30 $119.88
RD-92-07 Centaur Silver Medium Cage, 9 speed, 229 gr, LRC = 29, CW = 37 $119.88

RD-94-13 Centaur Silver Short Cage, 10 speed, 223 gr, LRC = 29, CW = 30 $129.88
RD-94-14 Centaur Silver Medium Cage, 10 speed, 229 gr, LRC = 29, CW = 37 $139.88
RD-94-15 Centaur Silver Long Cage, 10 speed, 241 gr, LRC = 29, CW = 39 $139.88
RD-92-00A Labor charge to convert any new 10 speed rear derailleur to current 9 speed $10.00

RD-94-10 Centaur Grey Short Cage, 10 speed, 223 gr, LRC = 29, CW = 30 $139.88
RD-94-11 Centaur Grey Medium Cage, 10 speed, 229 gr, LRC = 29, CW = 37 $144.88
RD-94-12 Centaur Grey Long Cage, 10 speed, 241 gr, LRC = 29, CW = 39 $144.88
RD-92-00A Labor charge to convert any new 10 speed rear derailleur to current 9 speed $10.00

RD-92-08 Veloce Short Cage, 9 speed, 250gr, LRC = 28, CW = 27 $79.88

RD-94-16 Veloce Short Cage, 10 speed, 223 gr, LRC = 29, CW = 27 $89.88
RD-94-17 Veloce Medium Cage, 10 speed, 229 gr, LRC = 29, CW = 36 $99.88
RD-94-18 Veloce Long Cage, 10 speed, 241 gr, LRC = 29, CW = 39 $99.88
RD-92-00A Labor charge to convert any new 10 speed rear derailleur to current 9 speed $10.00

Jockey Wheels, Bolts and Cage Assemblies

DP-98-03 Campagnolo 10 speed Jockey wheels - set of two $24.88
DP-98-02 Campagnolo 9 speed Jockey wheels - set of two, fits ALL Campy 9 speed rear derailleurs $24.88
DP-98-01 Campagnolo 8 speed Jockey wheels - set of two $24.88

DP-98-11 Campagnolo 4mm allen head Jockey wheel bolts for pre-2001 9 speed Record, Chorus, Daytona, Athena rear derailleurs. Also fits current 9 and 10 speed Campy rear deraillers but does not look as nice as the original. The original is no longer available separately from Campagnolo Italy. $4.88ea

DP-98-36 Record/Chorus 10 speed alloy cage assembly, short.
Contains two plates, pulley wheels, bolts and spring stud. $79.88

DP-98-37 Record/Chorus 10 speed alloy cage assembly, medium.
Contains two plates, pulley wheels, bolts and spring stud. $79.88

DP-98-70 Record/Chorus 10 speed alloy cage assembly, long.
Contains two plates, pulley wheels, bolts and spring stud. $79.88


DP-98-60 Record/Chorus/Daytona/Centaur 2001 to current rear derailleur hanger bolt sleeve with frame hanger stops. These often shear and your rear derailleur then flops upward. $29.88
DP-98-14 Record/Chorus/Athena/Daytona/Centaur/Veloce/Mirage 8/9 speed, 1995 to current, rear derailleur, 5mm, 5x1 thread, cable adjusting barrel without a spring. $19.88
DP-98-21 Record/Chorus/Daytona/Centaur 10 speed rear derailleur, 5mm, fine thread cable adjusting barrel without a spring. $22.88
DP-98-13 Record/Chorus/Daytona/Centaur/Veloce/Mirage 8/9/10 speed rear derailleur cable adjusting barrel spring ONLY. $2.88
DP-98-29 Record 2000 to current, rear derailleur cable clamp bolt. $19.88
DP-98-26 Pre 2001 Record, all years Chorus/Athena/Daytona/Centaur/Veloce/Mirage rear derailleur cable clamp bolt. Also fits all Campy front derailleurs. $5.88
DP-98-27 1999 to current, all models, rear derailleur cable clamp bolt Fixing Washer. $4.88
DP-98-25 Record/Chorus/Daytona/Centaur/Veloce/Mirage 1995 to current braze-on front derailleur mounting bolt and washer. 11.88
DP-98-05 10 speed front derailleur cage, grey resin insert. $11.88

 

Triple Chain Ring Upgrade

The hills only get steeper with each passing season!
To upgrade your Campy 8 or 9 speed double chainring gruppo to a triple you will need:
A triple chainring crank, a triple front and rear derailleur and usually a new bottom bracket.
All Campy ErgoPower, Bar End and Down Tube shifters will work with a triple front derailleur.

For detailed information regarding Campagnolo Triple 8/9 and 10 speed Cranksets,
visit the Crankset section, by clicking on the underlined text.

For detailed information regarding Campagnolo Bottom Brackets,
visit the Bottom Bracket section, by clicking on the underlined text.

 

Upgrade from 8 to 9 speed

Here is what you need to upgrade from Campy 8 to 9 speed.

RD-90-(model) Post 2001 9 speed rear derailleur. Veloce, Centaur, Chorus or Record. $79.88 and up
FW-98-42 9/10 speed Scirocco/Vento/Mirage cassette body $69.88
FW-98-23 9/10 speed Record Ti (fits Chorus too) cassette body.$99.88
FW-98-09 Campy Cassette Lock Ring - 12 tooth start, 26.0 diameter $24.88
TL-98-40 Campy Pawl holder tool $4.88
CH-98-50 9 speed Record Chain $29.88
FW-91-7(size) 9 speed Campy UD Loose Cog cassette $59.88

The Ergo lever index gear, LD-99-54 will fit ALL Campagnolo 8 speed Ergo levers from 1992 to 1997 and 1998 Campagnolo 9 speed levers. It will also fit 8 speed Sachs New Success Ergo levers.
LD-99-54 must be used with 2001 and later, Camapagnolo 9 speed rear derailleurs.

LD-99-54 9 speed Ergo lever insert gear for 2001 and later, 9 speed rear derailleurs $39.88
MA-80-76A Campagnolo 1992 to 1997 Ergopower Manual - recommended $4.88

The above parts will fit 1992 to 1997 Campagnolo 8 speed hubs, derailleurs and Ergo levers. The above Campy Chorus 9/10 speed cassette body comes in an HPW version for factory built wheels with straight pull spokes. Specify HPW when ordering. We also have a version for Euros/Sirrocco wheels that have two piece, non-threaded, Mirage style axles.
Any Campagnolo 8 speed Ergopower, downtube or bar-end shifter will also work perfectly with a Campagnolo 7 speed system. The amount of cable pull is identical for Campagnolo 7 and 8 speed systems.

Many riders are perfectly happy running 8 speeds and do not wish to convert to 9. However they are worried about 8 speed cassette availability. We suggest replacing your old steel, 8 speed cassette body with a new alloy 9/10 speed body. Then use the Wheels spacing kit, #FW-45-48 and a loose cog 9 speed cassette. Use just 8 of the 9 cogs, add the Wheels Mfg. spacers and you will not have to worry about cassette availability for at least another 3 to 5 years! Plus, you will reduce the weight of your rear wheel and be partially ready for a 9 or 10 speed conversion at some point in the future. Click on the underlined text to visit our Cassettes Section for more details.

Campagnolo Ergo Levers and Ergo Lever parts now have their own catalog section.

To visit the Ergo Shifter and Brake catalog section, click here

Upgrade from 8 speed to 10 speed

Here is what you need to upgrade:

LD-90-0(Model) 10 speed Ergo lever set $199.88 and up
RD-90-0(der. model) 10 speed rear derailleur $99.88 and up
FW-98-42 9/10 speed Scirocco/Vento/Mirage cassette body $69.88
FW-98-23 9/10 speed Record Ti (fits Chorus too) cassette body.$99.88
FW-98-09 Campy Cassette Lock Ring - 12 tooth start, 26.0 diameter $24.88
TL-98-40 Campy Pawl holder tool $4.88
FW-90-2(type,size) 10 speed cassette $89.88 and up
CH-90-12 Campagnolo 10 speed chain $44.88
CR-98-6(size) Campagnolo 10 speed outer chainring $59.88 and up
CR-98-79 Campagnolo 10 speed outer chain ring, (Record Only), .4mm chainring spacer $4.88
FD-90-(type, model) Campagnolo 10 speed front derailleur, comes with resin clip$44.88 and up
DP-98-05 Campagnolo 10 speed front derailler resin clip, needed for upgrades only $11.88
TL-90-11 10 speed Record Chain Tool $89.88

Upgrade from pre-2001 9 speed to 10 speed

Here is what you need to upgrade:

LD-90-0(model) 10 speed Ergo lever set $199.88 and up
LD-97-42 10 speed Ergo conversion Cog, read the above discussion first $39.88
RD-90-0(der. model) 10 speed rear derailleur $99.88 and up
FW-90-2(type,size) 10 speed cassette $89.88 and up
CH-90-11 Campagnolo 10 speed chain $44.88
CR-98-6(size) Campagnolo 10 speed outer chainring $59.88 and up
CR-98-79 Campagnolo 10 speed outer chain ring, (Record Only), .4mm chainring spacer $4.88
FD-90-(type, model) Campagnolo 10 speed front derailleur, comes with a resin clip $39.88 and up
DP-98-05 Campagnolo 10 speed front derailler resin clip, needed for upgrades only $11.88
TL-90-11 10 speed Record Chain Tool $89.88

Upgrade from pre-2001 9 speed to Current 9 speed

Here is what you need to upgrade:

LD-90-(Record,Chorus,Centaur or Veloce) 9 speed Ergo lever set or just replace the right Ergo lever cog. From $ 169.88 pr
LD-99-54 or LD-99-52 9 speed Right Ergo lever conversion Cog, read the above discussion first $39.88
RD-90-(Record,Chorus,Centaur or Veloce) 9 speed rear derailleur From $ 79.88
You may reuse your old 9 speed cassette, chain, front derailleur and crankset.

 

Official Campagnolo Overhaul and Service Manuals

Official Campagnolo Service manuals make it easy to adjust or repair current and older Camapgnolo components. Detailed, step by step instructions with exploded parts diagrams will walk you through official Campagnolo repair procedures. Tools needed, helpful tips and excellent graphics grace the pages of these fine manuals.
Difficult to come by but all are in stock. These are NOT the same manuals that come with various Campagnolo products.
Written in English and easy to follow for home mechanics.


MA-80-76A Ergo Power Manual - 1993 to 1997 $4.88
MA-80-76 Ergo Power Manual - 1998 to Current $4.88
MA-80-76B Front and Rear Hubs - 1992 to Current $4.88
MA-80-76C Headsets, Threaded and Threadless - 1993 to Current $4.88

 

Ergo Levers and Replacement Hoods

Campagnolo Ergo Levers and Ergo Lever parts now have their own catalog section.

To visit the Ergo Shifter and Brake catalog section, click here

Downtube Cable Adjusters

FS-98-00 Record down tube cable adjusters - curved backs - set of two $39.88pr
FS-98-01 Record down tube cable adjusters - flat backs - set of two $44.88pr
FS-98-02 Centaur/Veloce down tube cable adjusters - curved backs -set of two $24.88pr

 

Downtube Shifters

Campagnolo no longer produces any downtube shifters.

However, Campagnolo Bar End shifters may be easily converted to Campagnolo down tube mounted shifters with a Le Tour Down Tube conversion kit. Click on the underlined text for more information.

 

Bar End Shifters

Campagnolo Bar End Shifters now have their own catalog page.

To visit the Campagnolo Bar End Shifter catalog page, click here

 

Brake Calipers

Campagnolo Brakes, Levers, Cables, Housing, Pads and Spare Parts now have their own catalog section.

To visit the Brakes catalog section, click here

 

Genuine Campagnolo Cables and Housing

CA-98-0(color) Brake Cable Set
Two brake wires and pearl white or traditional grey housing. We can no longer get black Campy brake housing except in the full Ergo Cable/Casing sets. A good alternative is the Le Tour black housing listed in our Brake Cable Section.$24.88pr


CA-98-02 Ergo Cable and Housing Set
Two brake wires, two Ergo derailleur wires and a full set of black derailleur and brake housings $49.88


Campagnolo only provides a few 5 mm end caps and no cable crimps with their cable kits. We suggest adding a bag of Le Tour cable crimps and 5 mm end caps to your order. See below or click on the underlined text to visit our Brake Cable Section for more details. We also stock brake and derailleur housing in several different colors in our Brakes Section.

CA-98-11 Campagnolo single stainless steel brake wire - rear $9.88ea
CA-98-22 Campagnolo single stainless steel Ergo der wire - rear $9.88ea

Le Tour Cable Crimps, End Caps and Donuts

LT-CC-BD Le Tour brake and derailleur cable crimps - bag of 10 $1.88
LT-CC-EC Le Tour brake/derailleur housing ferrules, chrome, 5mm - bag of 5 $2.88
LT-CC-D Le Tour derailleur housing ferrules, alloy, 4mm - bag of 5 $2.88
LT-CD-C Le Tour cable donuts, clear - bag of 10 $1.88
LT-CD-B Le Tour cable donuts, black - bag of 10 $1.88

 

Front Hubs and Skewers

32 or 36 holes in all models.
Comes with a skewer. Weights include the skewer.

HU-92-35 Record 32 hole, 181 gr $99.88
HU-92-36 Record 36 hole, 181 gr $99.88

HU-92-14 Record Track 32 hole, 204 gr $169.88
HU-92-15 Record Track 36 hole, 204 gr $169.88

HU-92-05 Chorus 32 hole, 182 gr $89.88
HU-92-06 Chorus 36 hole, 182 gr $89.88

HU-92-25 Centaur Silver 32 hole, 186 gr $84.88
HU-92-26 Centaur Silver 36 hole, 186 gr $84.88

HU-94-30 Centaur Grey 32 hole, 186 gr $84.88
HU-94-31 Centaur Grey 36 hole, 186 gr $84.88

HU-94-34 Veloce 32 hole, 241 gr $39.88
HU-94-35 Veloce 36 hole, 241 gr $39.88

QR-98-06 Record front quick release, 64grams $48.88
QR-98-08 Chorus front quick release, 68 grams $39.88
QR-98-12 Centaur front quick release, 72 grams $29.88
QR-98-08Z Zipp Titanium Skewer Set - front and rear.
Fits Zipp, Campy, Shimano, Mavic, etc. Black with laser etching. Just 85 grams per pair! $59.88pr

 

Rear Hubs, Freehub Bodies and Skewers

All Campagnolo 9/10 speed hubs will fit all Campagnolo 9 or 10 speed cassettes.
All Campagnolo 9/10 speed rear hubs can be converted to 8 speed with a Wheels spacing kit, part # FW-45-48 for $29.88, and any loose cog, Campagnolo 9 speed cassette. Drop a cog, add spacers and you have a perfectly spaced 8 speed cassette on a 9 or 9/10 speed hub. Click on the underlined text to visit our Cassettes Section for more details.

All models are available in 32 or 36 holes. All hubs comes with a skewer. Weights include a skewer.
Record, Chorus and Centaur use an oversize 7075 alloy axle. Veloce uses a steel oversize axle.
All hubs come with 27.0 mm, oversize, cassette lockring for a starting position 12 or 13 tooth cog.
All Campagnolo 8, 9 or 10 speed hubs use an axle length of 130 mm as measured from the inside face of the right rear frame dropout to the inside face of the left rear frame dropout. Older, 6 speed freewheel style hubs used a spacing of 120 or 126 mm.

HU-92-38 Record 32 hole, 9/10 speed, 316 gr $199.88
HU-92-39 Record 36 hole, 9/10 speed, 316 gr $199.88

HU-92-16 Record Track 32 hole, 284 gr $187.88
HU-92-17 Record Track 36 hole, 284 gr $187.88

HU-92-07 Chorus 32 hole, 9/10 speed, 326 gr $169.88
HU-92-08 Chorus 36 hole, 9/10 speed, 326 gr $169.88

HU-92-27 Centaur Silver 32 hole, 9/10 speed, 332 gr $147.88
HU-92-28 Centaur Silver 36 hole, 9/10 speed, 332 gr $147.88

HU-94-32 Centaur Grey 32 hole, 9/10 speed, 332 gr $149.88
HU-94-33 Centaur Grey 36 hole, 9/10 speed, 332 gr $149.88

HU-92-78 Veloce 32 hole, 9/10 speed, 458 gr $79.88
HU-92-79 Veloce 36 hole, 9/10 speed, 458 gr $79.88

FW-98-41 Shimano splined 8/9/10 speed freehub body fits all above hubs except Veloce. Convert any Campagnolo 1999 to current Record, Chorus, Daytona or Centaur rear hub for use with a Shimano 8, 9 or 10 speed cassette. Made by Campagnolo. Also fits 1999 to current Campagnolo factory wheels except Scirocco and Vento. Comes with pawls and retainer spring. $99.88

FW-98-30 Campagnolo Record 9/10 speed freehub body to fit all above hubs except Veloce. Also fits 1999 to current Campagnolo factory wheels except Scirocco and Vento. Comes with pawls and retainer spring. $129.88

FW-98-33 Campagnolo Chorus 9/10 speed freehub body to fit all above hubs except Veloce. Also fits 1999 to current Campagnolo factory wheels except Scirocco and Vento. Comes with pawls and retainer spring. Identical to the Record body but has a steel pawl carrier and thus weighs 30 grams more. $99.88

QR-98-07 Record rear quick release, 68 grams $48.88
QR-98-09 Chorus rear quick release, 66 grams $39.88
QR-98-13 Centaur rear quick release, 76 grams $29.88
QR-98-08Z Zipp Titanium Skewer Set - front and rear.
Fits Zipp, Campy, Shimano, Mavic, etc. Black with laser etching. 85 grams per pair! $59.88pr

 

Hub Parts and Freehub or Cassette Bodies

Older, 1993 to 1997, Campagnolo Record and Chorus rear hubs used a threaded axle with a 13 mm long, cassette shoulder. 1993 to 1999, Campagnolo Athena and Veloce hubs use the same axle type but had a longer, 22 mm, cassette shoulder.
Chorus and Record 8 and 9/10 speed, 1993-1998 cassette bodies fit all Record and Chorus hubs from 1993 to 1998.
Veloce and Athena 8 and 9/10 speed 1993-1999, cassette bodies fit all Veloce and Athena hubs from 1993 to 1999.
Because of the different axle shoulder lengths you may not interchange Record/Chorus 1993 to 1998 cassette bodies with 1993 to 1999 Athena/Veloce cassette bodies.
Newer, 1999 to present 9/10 speed oversize Campy hubs use an oversize axle and cassette body. You may interchange oversize axle cassette bodies.
We have cones and bearings for older and current Campy hubs in stock.

1999 to current Hub Parts, Cassette Bodies and Parts

HU-98-69 Record/Chorus/Centaur Rear hub, left side, axle end cap/5 mm bolt $12.88
HU-99-52 Record/Chorus/Centaur Rear hub, left side washer fits the axle end cap/5 mm bolt $3.88
HU-98-53 Record Rear hub, left side, threaded adjusting sleeve with an allen bolt $34.88
HU-90-80 Chorus Rear hub, left side, threaded adjusting sleeve with an allen bolt $35.88
HU-90-81 Centaur Front and Rear hub, threaded adjusting sleeve with an allen bolt $19.88
HU-98-63 Record/Chorus/Centaur Front and Rear hub, split section, adjusting cone $17.88 each
HU-98-66 Record/Chorus/Centaur Front and Rear hub, right and left sides, white dust seal $6.88 each
HU-98-67 Record/Chorus/Centaur Front and Rear hub, right and left side, bearing cone $29.88 each
BB-98-06 Record/Chorus/Centaur Front and Rear hub, right and left side, bearing ring with 5/32 balls $9.88ea
HU-98-68 Record/Chorus/Centaur Front and Rear hub, right and left side, pressed in bearing cup $29.88 each
HU-99-55 Record/Chorus/Centaur Rear hub, oversized alloy axle ONLY $39.88 each
HU-99-50 Record/Chorus/Centaur Front hub, oversized alloy axle ONLY $39.88 each
Hub Shells are available. Front and Rear hub shells for Record, Chorus and Centaur/Daytona are available. Email for Price

FW-98-30 Record Rear hub, 9/10 speed Cassette body with pawls and retainer spring $129.88 each
FW-98-33 Chorus/Centaur Rear hub, 9/10 speed Cassette body with pawls and retainer spring $99.88 each
FW-98-31 Record/Chorus/Centaur Rear hub, 9/10 speed Cassette body pawl retainer spring $5.88 each
FW-98-32 Record/Chorus/Centaur Rear hub, 9/10 speed Cassette body, single pawl, 3 required $5.88 each

HU-99-58 Record/Chorus/Centaur Rear hub, Right side, axle cap nut $19.88 each
HU-99-51 Record/Chorus/Centaur Front and Rear hub, center grease port C clip $9.88 each

HU-98-58 Record/Chorus/Centaur Front hub, Left side, 5mm allen head, axle cap nut $12.88
HU-98-59 Record/Chorus/Centaur Front hub, Left side washer for the above 5mm allen head, axle cap nut $2.88
HU-98-62 Record/Chorus Front hub, left side, threaded adjusting sleeve with an allen bolt $34.88
HU-98-57 Record/Chorus/Centaur Front hub, right side, snap on dust cap $5.88

Pre - 1999 Hub Parts, Cassette Bodies and Parts

HU-82-50 Wheels Mfg threaded rear axle, fits all Campy freewheel style hubs.
130 spacing but may be cut to fit 126 or 120 mm spaced frames.
10 x 1 x 26 threads per inch. No keyway or slot. $19.88

HU-82-50A Genuine Campagnolo threaded rear axle with a keyway or slot. Fits all Campy freewheel style hubs.
120 spacing fits 120 mm spaced frames which used 5 speed freewheels..
10 x 1 x 26 threads per inch. $19.88

HU-98-05 Genuine Campy 7/32 inch front axle cones for Record, Record Track, C Record, Nuovo and Super Record front hubs $9.88 each
HU-98-19SR Genuine Campy 1/4 inch rear axle cones for Record, Chorus, Athena, Veloce, Nuovo and Super Record, Record Track, Tipo and Gran Sport freewheel style hubs $9.88 each
HU-90-R5 Rear Axle Spacer,alloy, 5 mm wide $2.88
HU-90-R10 Rear Axle Spacer,alloy, 10 mm wide $3.88
HU-90-F1 Front Axle Steel keyed washer, 1 mm wide $1.88
HU-90-R1 Rear Axle Steel keyed washer, 1 mm wide $2.88

HU-98-19 Record 1993-1998 Cassette hub, Cro-Moly, 13mm shoulder, rear axle with 7/32 drive side race installed $49.88
HU-98-12 Veloce/Athena 1993-1999 Cassette hub, Cro-Moly, 22mm shoulder, rear axle with 7/32 drive side race installed $29.88
HU-98-29 Record 1993-1998 Cassette hub, Titanium, 13 mm shoulder, rear axle with 7/32 drive side race installed $49.88
HU-98-27 All models 1993-1999 Cassette hub, rear axle 1/4 inch bearing cone $9.88
HU-98-11 All models 1993-1999 Cassette hub, rear axle left 7/32 inch bearing slip-on cone $19.88
HU-98-30 Record 1993-1998 Cassette hub, Ti rear axle right lock nut, w/o set screw $14.88
HU-98-23 All models 1993-1998 Cassette hub, Cro-Moly rear axle right lock nut, w/o set screw $9.88
HU-97-74 Cassette hub, Titanium rear axle right lock nut allen set screw $4.88
HU-98-24 Cassette hub, Cro-Moly rear axle right lock nut allen set screw $4.88
HU-97-76 1993-1999 Cassette hub, threaded axle, hub center grease port clip $9.88
HU-97-75 1993-1999 Front hub, threaded axle, hub center grease port clip $9.88
HU-98-20 Rear Cassette Hub Outside Dust Cap w/rubber seal, Left or non-drive side $9.88
HU-98-21 Rear Cassette Hub Inside Dust Cap, Right or drive side $6.88

FW-99-R7 7 speed Record (fits Chorus too) cassette body - ON SALE! $29.88
FW-98-42 9/10 speed Scirocco/Vento/Mirage cassette body $69.88
FW-98-23 9/10 speed Record Ti (fits Chorus too) cassette body.$99.88
FW-98-04 Individual pawls for the above cassette bodies and older 7 and 8 speed ones. 3 required.$5.88ea
FW-98-05 Individual pawl springs for the above cassette bodies and older 7 and 8 speed ones. 3 required.$2.88ea
HU-98-31 Rubber O ring seal for the above cassette bodies and older 7 and 8 speed ones. 1 required.$4.88

Zipp Replacement Hubs and Freehub Bodies

HU-99-Z816 Zipp 84 straight pull front hub, 16 holes $149.88 each
HU-99-Z818 Zipp 84 straight pull front hub, 18 holes $149.88 each
HU-99-Z820 Zipp 84 straight pull front hub, 20 holes $149.88 each
HU-99-Z824 Zipp 84 straight pull front hub, 24 holes $149.88 each

HU-99-Z224 Zipp 202 straight pull rear hub, 24 holes without a freehub body $195.88 each
HU-99-Z228 Zipp 202 straight pull rear hub, 28 holes without a freehub body $195.88 each

HU-99-Z920 Zipp 95 traditional flanged front hub, 20 holes $189.88 each
HU-99-Z928 Zipp 95 traditional flanged front hub, 28 holes $189.88 each
HU-99-Z932 Zipp 95 traditional flanged front hub, 32 holes $189.88 each

HU-99-Z124 Zipp 220 traditional flanged rear hub, 24 holes without a freehub body $139.88 each
HU-99-Z128 Zipp 220 traditional flanged rear hub, 28 holes without a freehub body $139.88 each
HU-99-Z132 Zipp 220 traditional flanged rear hub, 32 holes without a freehub body $139.88 each

FW-98-23ZS Zipp 2003 to current 8/9 speed Shimano cassette body.$99.88
FW-98-23ZC Zipp 2003 to current 8/9/10 speed Campagnolo cassette body.$99.88

 

Campagnolo Cassettes now have their own catalog pages.

To visit the Cassette catalog section, click here

 

8, 9 and 10 speed cassette lockrings

Campagnolo Cassette Lockrings now have their own catalog page.

To visit the Cassette catalog section, click here

 

8, 9 and 10 speed chains

Campy chains now have their own catalog page.

To visit the Chains and Chainring catalog section, click here

 

Genuine Campagnolo Ball Bearings

Newer Campy hubs with oversize alloy bodies and axles use the same size bearings in both the front and rear hubs.
Older Campy Record front hubs used 7/32" bearings. Older, Chorus, Athena and Veloce front hubs used 3/16" bearings.
Older, 7, 8 and 9 speed Campy rear hubs used 7/32" bearings on the cassette side and 1/4" on the non-drive side. Older still, freewheel style rear hubs used 1/4" on both sides.
Many riders save money by reusing Campagnolo resin bearing retainers. Clean the retainer with solvent and then pop in, Le Tour loose ball bearings.
All Campagnolo ball bearings are Grade 25 which means that the deviation from a perfect sphere is less than .00025 inches!
For longest life and smoothest performance we recommend using Le Tour Whisper White grease with the Le Tour Grease Gun for all Campagnolo bearings.

BB-98-03 Right side rear hub, 10 loose Campagnolo balls, 7/32, Campy # FH-RE004 $9.88
BB-98-02 Left rear hub, 9 loose Campagnolo balls, 1/4, Campy # FH-RE006 $9.88
BB-98-00 Record Front hub, 18 loose Campagnolo balls, 7/32, Campy # HB-RE008 $14.88
BB-98-01 Chorus, Athena, Veloce front hub, 20 loose Campagnolo balls, 3/16, Campy # HB-CH002 $9.88

BB-10-01 Le Tour Grade 25 loose ball bearings, 1/4 inch, bag of 20 $7.88
BB-10-02 Le Tour Grade 25 loose ball bearings, 7/32 inch, bag of 25 $7.88
BB-10-03 Le Tour Grade 25 loose ball bearings, 3/16 inch, bag of 25 $7.88
BB-10-04 Le Tour Grade 25 loose ball bearings, 5/32 inch, bag of 75 $9.88
BB-10-05 Le Tour Grade 25 loose ball bearings, 1/8 inch, bag of 144 $9.88

BB-90-00 1 1/8 inch Campagnolo Headset bearings and retainer, 5/32 upper and lower $24.88pr
BB-90-02 1 1/8 inch Campagnolo Hiddenset bearings and retainer, 1/8 upper and lower $19.88pr
BB-97-00 1 inch Campagnolo Headset bearings and retainer, 5/32" top and 3/16" bottom $19.88pr
BB-90-01 1 inch Campagnolo Hiddenset bearings and retainer, 5/32 upper and lower $18.88pr

BB-98-06 New Oversize, 5/32 inch front or rear Campy hub bearings and retainer. 2 required per hub. Campy # HB-RE023 $9.88ea
BB-98-07 New Oversize Ceramic, 5/32 inch front or rear Campy hub bearings and retainer. 2 required per hub. Campy # HB-HY023 $69.88ea

BB-69-03 Le Tour sealed cartridge bearing, non-drive or left side. Fits 1996 to current Record and Chorus cartridge style bottom brackets.$9.88
BB-88-03 Le Tour sealed cartridge bearing pair, drive or right side. Fits 1996 to current Record and Chorus cartridge style bottom brackets.$19.88

 

Run a Campy 8 speed cassette on a 9/10 speed hub! How?

Are Campy and Shimano 9 speed cassettes interchangeable?

How can I space a Campy 8 speed cassette to 9 speed?

How can I space a Shimano rear wheel for use with a Campagnolo 9 or 10 speed system?

For answers to these and many more cassette related questions visit our Cassettes Section.

To visit the Cassette catalog section, click here

 

Campagnolo Factory Built Wheels, Rims and replacement spokes

Campy Factory Wheels, Rims and replacement spokes now have their own catalog pages.

To visit the Campagnolo Wheels catalog section, click here.

To visit the Campagnolo Rims and replacement Spokes catalog section, click here.

 

ErgoBrain 9 and ErgoBrain 10 Computers

Campy bike computers and spare parts now have their own catalog pages.

To visit the ErgoBrain catalog section, click here

 

Campagnolo Decals, Tees, Corkscrews and other fine gifts

Campy Decals and Gifts now have their own catalog pages.

To visit the Decals and Gifts catalog section, click here

 

Campagnolo Jerseys, Shorts, Socks, Gloves, Caps and Headbands

Campy Clothing now has their own catalog pages.

To visit the Campy Jersey and Shorts catalog section, click here

To visit the Campy Caps, Headbands and Socks catalog section, click here

 

Need more information? Campagnolo's Official Web Site

For UNofficial information and reviews of Campagnolo, it's
Campagnolo Only
(Major sponsorship provided by Branford Bike)

 
100% Satisfaction Guaranteed

At Branford Bike we want you to be happy and satisfied with everything you purchase from us. We understand that sometimes you will need to return a product because it was not quite what you wanted. You may return anything you purchase from us within 60 days and unused, for an immediate exchange or refund.

 
Click on the underlined text to go to the...

Previous Section
Featuring Hubs and Tools

Branford Bike Catalog
Main Table of Contents

Next Section
Featuring Handlebar Tape and Trim
Branford Bike Catalog Index
Quickly find an item or see everything that is in our catalog.
 
 
Order Online via our Secure Order Form

and receive FREE expedited processing with email confirmations.

Our Secure Order Form is easy to use. Simply fill in the boxes as you would for a traditional paper catalog order form.

Our Secure Order Form opens in a separate window that you may resize and tile behind our online catalog. After filling in your name, address and card information you may leave the order window open. Browse through our catalog and when you wish to purchase an item simply "cut and paste" the part number and description to the appropriate order form boxes.

When you are done shopping, submit your order for error checking, and then for processing. We will email you a confirmation within 10 minutes. Another, more detailed confirmation, will follow when we ship your order.

   
We accept Visa, Discover and MasterCard for payment.
We will NOT charge your card until your order is shipped.

Go to our Secure Ordering Page

For more information, call: (203) 488-0482
Our phone hours are: Monday, Wednesday & Friday, 12 noon - 3 pm Mountain Time

To print this page in Netscape Navigator or Microsoft Explorer:
Choose File from the upper menu bar, click, and then click on Print...