• Genuine replacement headlamp units for NiteRider lighting systems.
• Comes with the original wattage and voltage bulb.
• Handlebar or helmet clamp assemblies are NOT included. Order those separately.
• All models, except one, are current and use SurLok connectors. The pre-2002 10 watt headlamp listed below uses pre-2002 6 volt connectors.
• HID headlamps must be used with a 12 volt battery. All required electronics are built into the HID headlamp unit.
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• Both current and older, single and dual beam, NiteRider lights use the same type of mount.
• You may choose from a helmet, headband or handlebar mounting style.
• All three mount styles allow you to pivot the headlamp unit up or down 45 degrees.
• The Explorer headband pictured above is ideal for hands free lighting. It is widely used for trail biking, horseback riding, hiking, rafting and other night time activities.
• The feather light helmet mount pictured below is ideal for any helmet with front vent holes. The 12 inch (30 cm) Velcro straps loop through the vents and back to the mount for a solid and secure fit.
• NiteRider's Universal bar clamp can rotate in three planes and fits handlebars from 25.4 to 32mm in diameter.
• NiteRider's CamLok quick release handlebar mount pictured below, is a engineering marvel. You may mount it to the left or right side of your stem on your handlebar. It will sit over your stem and conserve bar space. Fits standard diameter handlebars. Easy to install and remove.
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• The NiteRider 6 volt battery pouch securely holds one NiteRider 6 volt flat pack battery.
• The 6 volt battery pouch easily clips on to your waistband, pocket edge, belt or a NiteRider Explorer headband.
• The larger battery bag, will hold a flat pack 13.2 volt HID style battery or a sealed lead acid battery.
• The battery bag easily mounts to your belt, bicycle frame tube or hydratation pack with two Velcro straps. The battery bag is 2.5 inches tall, 1.5 inches wide and 4 inches long.
• Both the pouch and bag let you mount your batteries just about anywhere you want to.

• Keeps your light components together and stored safely.
• Two sizes fit all NiteRider Lighting systems and most other brands.
• Use the large bag for dual beam or bottle battery systems. Use the small bag for single beam, small battery lights.
• Heavy duty Nylon fabric is tough, long wearing and feather light.
• Dual, nylon zippers with a wide velcro closure provide easy access.
• Back side loop allows you to carry this bag on your belt.
• Exceptionally priced and well made.

• We stock a full range of individual parts and accessories for NiteRider lights. Click on the underlined text below to read more about replacement parts and accessories.
• Visit our NiteRider Batteries page to read about replacement batteries, chargers and adaptor cables for older systems.
• Visit our NiteRider Tail Lights page to read about super bright NiteRider LED tail lights.
• Visit our NiteRider Bulbs and Cables page to read about bulbs and extension cables.
• Visit our NiteRider Lamp Heads and Mounts page to read about lamp heads, headbands, helmet mounts, handlebar mounts and carry bags.

At Branford Bike we want you to be happy and satisfied with everything you purchase from us. We understand that sometimes you will need to return a product because it was not quite what you wanted. You may return anything you purchase from us within 60 days and unused, for an immediate exchange or refund.

Our Secure Order Form is easy to use. Simply fill in the boxes as you would for a traditional paper catalog order form.

Our Secure Order Form opens in a separate window that you may resize and tile behind our online catalog. After filling in your name, address and card information you may leave the order window open. Browse through our catalog and when you wish to purchase an item simply "cut and paste" the part number and description to the appropriate order form boxes.

When you are done shopping, submit your order for error checking, and then for processing. We will email you a confirmation within 10 minutes. Another, more detailed confirmation, will follow when we ship your order.

   
We accept Visa, Discover and MasterCard for payment.
We will NOT charge your card until your order is shipped.

To print this page:
Use your browser's Print command or
press Ctrl + P on Windows, or Command + P on Mac.