• NiteRider produces halogen bulbs in 6 or 12 volt versions. They also produce an H.I.D. or High Intensity Discharge bulb for their 12 volt HID lights.
• The sealed, halogen bulb assembly is easy to install and will fit all current and older NiteRider lighting systems. Step by step instructions are included.
• Spot or Flood beam patterns are available for 15 and 20 watt bulbs.
• You may upgrade your light with a brighter bulb (higher wattage) or a wider beam bulb.
• For extra safety and zero down time we suggest keeping a spare bulb with your biking gear.
• 6 volt halogen bulbs can be used in any digital or non-digital, NiteRider 6 volt lighting system.
• 12 volt bulbs can be used in any, digital or non-digital, 12 volt non-HID NiteRider lighting system. 12 volt systems are sometimes referred to as 13.2 volt sytems. They are the same.
• HID bulbs may only be used in NiteRider 2001 to current, HID lighting systems.
• NiteRider HID Spot bulb, NR-LS-6614, is recommened for use on an HID helmet light when used in conjuction with a handlebar mounted light. It is quite bright but the pattern is not wide enough for really dark riding conditions.
• Not sure of what bulb you have? NR-LS-4108 and NR-LS-4110 are original equipment with all 12 volt NiteRider halogen lights. NR-LS-1009 is the only 10 watt, 6 volt bulb NiteRider makes. NR-LS-1063 is original with all NiteRider single beam 6 volt lights. All NiteRider HID lights use the NR-LS-6611 replacement bulb.
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• 2002 to current NiteRider lights use SurLok connectors. SurLok extension cables may be used with 6 or 12 volt sytems and come in two lengths; 12 inches (30 cm) or 36 inches (92 cm).
• Pre-2002 NiteRider lights used one connector style for 12 volt lights and another style for 6 volt systems.
• Most pre-2002 6 volt NiteRider lights used a three connector male pin as pictured above. Some pre-2002 non-digital lights used a two conductor male pin. The three conductor cable pictured above will work fine with two or three conductor, NiteRider 6 volt lights.
• Single extension cables may be connected for greater length.
• Need an extension cable for your pre-2001 Niterider 12 volt light? Purchase a NR-LS-6405 and a NR-LS-6466 battery adapter cables. Then simply use a current 12 or 36 inch SurLok Extension cable between the two battery adapter cables.
• We have extra long cables (NR-LS-6249) for pre-2002 NiteRider 6 volt lights. It is pictured below. One end connects to the lamp head while the other end connects to your battery. It was widely used for helmet mounted lights.
• We also have two conductor, coiled cords with two matching male ends. It was used for NiteRider Premium, Cycleops and a few other lights. Fully stretched it is 82 inches (208 cm) long.
• Professional repairs, warranty service and help with technical questions is available from NiteRider in San Diego, California. Call NiteRider at (858) 268-9316, email them at Bike@NiteRider.com or visit them at NiteRider.com by clicking on the underlined text .

• We stock a full range of individual parts and accessories for NiteRider lights. Click on the underlined text below to read more about replacement parts and accessories.
• Visit our NiteRider Batteries page to read about replacement batteries, chargers and adaptor cables for older systems.
• Visit our NiteRider Tail Lights page to read about super bright NiteRider LED tail lights.
• Visit our NiteRider Bulbs and Cables page to read about bulbs and extension cables.
• Visit our NiteRider Lamp Heads and Mounts page to read about lamp heads, headbands, helmet mounts, handlebar mounts and carry bags.

At Branford Bike we want you to be happy and satisfied with everything you purchase from us. We understand that sometimes you will need to return a product because it was not quite what you wanted. You may return anything you purchase from us within 60 days and unused, for an immediate exchange or refund.

Our Secure Order Form is easy to use. Simply fill in the boxes as you would for a traditional paper catalog order form.

Our Secure Order Form opens in a separate window that you may resize and tile behind our online catalog. After filling in your name, address and card information you may leave the order window open. Browse through our catalog and when you wish to purchase an item simply "cut and paste" the part number and description to the appropriate order form boxes.

When you are done shopping, submit your order for error checking, and then for processing. We will email you a confirmation within 10 minutes. Another, more detailed confirmation, will follow when we ship your order.

   
We accept Visa, Discover and MasterCard for payment.
We will NOT charge your card until your order is shipped.

To print this page:
Use your browser's Print command or
press Ctrl + P on Windows, or Command + P on Mac.