• Deluxe 7 position magnetic resistance unit for all years Minoura Action rollers. Comes with a black cover that has three bolt holes. Clear cover pictured above. V belt sold separately below.
  WT-10-17 $54.88





• Extra Minoura Mag Unit replacement "V" type belt, fits 4 inch drums only.
  WT-10-15 $14.88





• Optional, heavy duty nylon carrying bag for Action rollers.
  WT-10-13 $29.88





• Assist Leg - helps to support the roller frame. Fits all years of Minoura rollers.
  WT-10-31 $9.88 each

• Universal Roller belt. This belt is 3/16 of an inch (6 mm) wide and fits all rollers with 4 to 5 inch (100 to 130 mm) in diameter, drums. This belt may be cut with a sharp knife and welded with a propane or benzene torch. Minoura Action rollers have 4 inch drums.
  WT-10-06 $14.88 each
• Universal Roller belt. This belt is 3/16 of an inch (6 mm) wide and fits all rollers with 3 to 3.75 inch (76 to 95 mm) in diameter, drums. This belt may be cut with a sharp knife and welded with a propane or benzene torch.
  WT-10-06A $14.88 each



• Extra replacement aluminum drum, 360 mm wide. Pre-1996 models require the purchase of three drums.
  WT-10-32 $49.88


• Extra dome nut for the drum's axle. Fits all years of Minoura rollers.
  WT-10-33 $2.88 each





• Extra adjustable replacement foot. Fits all years of Minoura rollers.
  WT-10-29 $7.88 each
• Complete roller rail set with feet. Right and left tri-fold rails. Fits all years of Minoura rollers.
  WT-10-29A $49.88

• Ergo Handlebar Shifter Kit - converts a unit mounted resistance control to a bar mounted one. Fits current Ergo trainers and almost all older Minoura trainers. Fits both Rim Drive and Tire Drive models. Older models had four bolt holes; newer and current Ergo models use three bolts to hold this cover on.
  Mark the old cover position carefully. Changing the position will reverse the resistance scale. No damage will occur though.
  WT-80-15 Four Bolt Model $49.88
  WT-81-50 Three Bolt Model $39.88





• Hyper Handlebar Shifter Kit - converts a unit mounted resistance control to a bar mounted one. Fits year 2000 to current, Hyper Minoura trainers. Fits both Rim Drive and Tire Drive models. Mark the old cover position carefully. Changing the position will reverse the resistance scale. No damage will occur though.
  WT-81-52 Three Bolt Model $49.88



• Hyper Shifter Kit - converts a bar mounted resistance control to a unit mounted one. Fits year 2000 to current, Hyper Minoura trainers. Fits both Rim Drive and Tire Drive models. Mark the old cover position carefully. Changing the position will reverse the resistance scale. No damage will occur though.
  WT-81-52A Three Bolt Model $29.88





• Rim Drive Trainer replacement rubber roller. Magnetic unit side with a "V" belt groove. Comes with heavy duty, sealed bearings.
  WT-10-40 $29.88





• Rim Drive Trainer replacement rubber roller. Tension roller for the non-magnetic unit side. Comes with heavy duty, sealed bearings. Does not have a belt groove.
  WT-10-44 $19.88

• Minoura Trainer axle end caps - these fit all CURRENT Minoura trainers and butt against your bicyle's rear axle or quick release skewer.
  Two required. WT-10- 42 fits the cassette or freewheel side; WT-10-43 fits the non-drive side.
  WT-10-42 Drive Side Axle Cap $9.88
  WT-10-43 Non-drive Side Axle Cap $9.88






• RDA mag drive belt - this toothed "V" type belt fits almost all Minoura rim drive trainers. They last a long time but we suggest having an extra one on hand as they are difficult to come by.
  WT-10-16 $ 14.88

Heavy and bulky items such as trainers cost more to ship and can take longer to arrive.
•Please allow 7-10 days for ground shipping, and 2-3 days for air.
•An additional $10 may be added for ground shipment, and $35 for air.

At Branford Bike we want you to be happy and satisfied with everything you purchase from us. We understand that sometimes you will need to return a product because it was not quite what you wanted. You may return anything you purchase from us within 60 days and unused, for an immediate exchange or refund.

Our Secure Order Form is easy to use. Simply fill in the boxes as you would for a traditional paper catalog order form.

Our Secure Order Form opens in a separate window that you may resize and tile behind our online catalog. After filling in your name, address and card information you may leave the order window open. Browse through our catalog and when you wish to purchase an item simply "cut and paste" the part number and description to the appropriate order form boxes.

When you are done shopping, submit your order for error checking, and then for processing. We will email you a confirmation within 10 minutes. Another, more detailed confirmation, will follow when we ship your order.

   
We accept Visa, Discover and MasterCard for payment.
We will NOT charge your card until your order is shipped.

To print this page in Netscape Navigator or Microsoft Explorer:
Choose File from the upper menu bar, click, and then click on Print...