Branford Bike - Started in June, 1976 Branford Bike
129 Sagittarius Skyway, PO Box 1711, Emigrant, MT 59027 USA
Click on the underlined text to:
order online via our Secure Order Form and receive FREE...
or send us an email  with your questions or comments.
Phone Answering Hours M-W-F, 12 noon - 3 PM Mountain Time
Information: (203) 488-0482  FAX: (203) 643-8078
 
Professional Repair Shop Section: Page 5

Click on an underlined item or scroll down this page to view everything.

- Park PCS-1 and PCS-2 Clamp Assemblies and parts -

- Park PRS-2, 3, 4 and Pre-1996 PRS-5 Clamp Assemblies and parts -

- Park PRS 5, 6 and 7 Clamp Assemblies and parts -

- Park Multi-use Oversize Clamp Assembly -

Order online via our - Secure Order Form - and receive FREE...
 
Park PCS-1 and 2 Clamp Assemblies
 
Park 100-1C Clamp for post June 1996 PCS-1 and PCS-2 Stands
 
Park new PCS Clamp
 
Park PCS-1 and PCS-2 Clamp Assemblies
  • This is the complete clamp assembly; you do not need to purchase any extra parts.
  • Simply unbolt your old, worn out Park clamp assembly and bolt on a new one.
  • The Park 100-1C Clamp pictured above fits all Park PCS-1 and PCS-2 repair stands manufactured after June 1996.
  • The Park 100-2C Clamp pictured below fits all Park PCS-1 and PCS-2 repair stands manufactured BEFORE June 1996.
  • Note how the older one has a tail. The newer clamp assembly has a cone shape that fits into a black composite holder mounted on your stand.
  • Replacement jaw covers with two cable grooves and rubber handle covers are available and listed below.
  • Proudly made in the USA by Park Tool.
  • Warranty service and help with technical questions is available from Park Tool in Saint Paul, Minnesoto USA. Call Park Tool at (651) 777-6868, email them at Info@ParkTool.com or visit them at ParkTool.com by clicking on the underlined text .
Park 100-2C Clamp for pre June 1996 PCS-1 and PCS-2 Stands
 
Park old PCS Clamp
 
Part # Description Normal
Retail		 Our Price
USD$		 You
Save
TL-74-11 Park 100-1C Clamp Assembly
Fits Post-June 1996 PCS-1 and PCS-2 Stands		 $100.00 $89.88 $10.12
TL-74-05 Park 100-2C Clamp Assembly
Fits Pre-June 1996 PCS-1 and PCS-2 Stands		 $100.00 $89.88 $10.12
TL-72-19 Park PCS-1 and PCS-2 Rubber Handle Grip
Fits 100-1C and 100-2C Clamps		 $6.00 $4.88 $1.12
TL-71-36 Park PCS-1 and PCS-2 Rubber Jaw Covers
Fits 100-1C and 100-2C Clamps		 $15.00pr $12.88pr $2.12
Click on the underlined text to order online via our Secure Order Form.
 
Park PRS-2, 3, 4 and 5 Clamp Assemblies
 
Park 100-3C Clamp for PRS 2,3,4, 5, 11 and 12 Repair Stands
 
Park PRS Clamp
 
Park PRS 2,3,4,5, 6,7,11 and 12 Clamp Assemblies
  • This is the complete clamp assembly; you do not need to purchase any extra parts.
  • Simply unbolt your old, worn out Park clamp assembly and bolt on a new one.
  • The Park 100-3C Clamp pictured above fits all Park PRS-2, PRS-2OS, PRS-3, PRS-3OS, PRS-4, PRS-4OS, PRS-4W, PRS-11 and PRS-12 repair stands. It will also fit PRS-5 repair stands manufactured BEFORE June 1996.
  • The Park 100-5C Clamp pictured below fits all Park PRS-6 and PRS-7 repair stands. It also fits PRS-5 repair stands manufactured AFTER June 1996.
  • Note how the above clamp has a tail. The below clamp assembly has a cone shape that fits into a black composite holder mounted on your stand.
  • Replacement jaw covers with two cable grooves and rubber handle covers are available and listed below.
  • Proudly made in the USA by Park Tool.
  • Warranty service and help with technical questions is available from Park Tool in Saint Paul, Minnesoto USA. Call Park Tool at (651) 777-6868, email them at Info@ParkTool.com or visit them at ParkTool.com by clicking on the underlined text .
Park 100-5C Clamp for PRS-5, 6 and 7 Repair Stands
 
Park PRS Clamp
 
Part # Description Normal
Retail		 Our Price
USD$		 You
Save
TL-71-04 Park 100-3C Clamp Assembly $200.00 $169.88 $30.12
TL-74-02 Park 100-5C Clamp Assembly $120.00 $109.88 $10.12
TL-72-19 Park PRS Rubber Handle Grip
Fits 100-3C and 100-5C Clamps		 $6.00 $4.88 $1.12
TL-71-07 Park PRS Rubber Jaw Covers
Fits 100-3C and 100-5C Clamps		 $15.00pr $12.88pr $2.12
Click on the underlined text to order online via our Secure Order Form.
 
Park Mult-Use Repair Stand Clamp Assembly
 
Park 100-3X Multi-Use Repair Stand Clamp
 
Park 100-3X Clamp
 
Park PRS 2,3,4,5,11 and 12 Multi-use Clamp Assembly
  • The 100-3X Extreme Range Repair Stand Clamp fits into the Park Professional Repair Stands and allows you to work easily and efficiently on almost any bike, no matter what the size or shape of the frame tubes.
  • Simply unbolt your old, worn out Park clamp assembly and bolt on the 100-3X one. Everything is included; you do not need any extra parts.
  • The 100-3X does it all: Clamps virtually any size or shape frame tube-Including oversized, square, rectangular, and even aero shaped tubes. Ideal for hard-to-clamp recumbent bikes.
  • Quick-adjusting “Slide and Lock” system allows the clamping jaws to adjust from 7/8 of an inch (22mm) to 4 inches (100mm) in a flash. Clamping pressure is fully adjustable.
  • The unique design allows the clamp to pivot 90 degrees. It clamps vertically or horizontally, allowing either the top and bottom or the left and right sides of a tube to be clamped. Narrower (3 ¼ inch) jaws for clamping on frames with tight access areas.
  • The 100-3X is available as a replacement clamp only, not as part of a repair stand package.
  • The Park 100-3X Clamp pictured above fits all Park PRS-2, PRS-2OS, PRS-3, PRS-3OS, PRS-4, PRS-4OS, PRS-4W, PRS-11 and PRS-12 repair stands. It will also fit PRS-5 repair stands manufactured BEFORE June 1996.
  • Replacement jaw covers with two cable grooves and rubber handle covers are available and listed below.
  • Proudly made in the USA by Park Tool.
  • Warranty service and help with technical questions is available from Park Tool in Saint Paul, Minnesoto USA. Call Park Tool at (651) 777-6868, email them at Info@ParkTool.com or visit them at ParkTool.com by clicking on the underlined text .
Park 100-3X Over Size Clamp Assembly
 
Park 100-3X Clamp
 
Part # Description Normal
Retail		 Our Price
USD$		 You
Save
TL-74-22 Park 100-3X Clamp Assembly $200.00 $179.88 $20.12
TL-71-07 Park PRS Rubber Jaw Covers
Fits 100-3X Clamps		 $15.00pr $12.88pr $2.12
Click on the underlined text to order online via our Secure Order Form.
 
 
 
100% Satisfaction Guaranteed

At Branford Bike we want you to be happy and satisfied with everything you purchase from us. We understand that sometimes you will need to return a product because it was not quite what you wanted. You may return anything you purchase from us within 60 days and unused, for an immediate exchange or refund.
 
Click on the underlined text to go to the...

Page 4
Park Repair Stand Accessories
Bicycle Repair Stands
Table of Contents
Branford Bike Catalog
Main Table of Contents
Next Section
Featuring Bicycle Saddles
Branford Bike Catalog Index
Quickly find an item or see everything that is in our catalog.
 
 
Order Online via our Secure Order Form

and receive FREE expedited processing with email confirmations.

Our Secure Order Form is easy to use. Simply fill in the boxes as you would for a traditional paper catalog order form.

Our Secure Order Form opens in a separate window that you may resize and tile behind our online catalog. After filling in your name, address and card information you may leave the order window open. Browse through our catalog and when you wish to purchase an item simply "cut and paste" the part number and description to the appropriate order form boxes.

When you are done shopping, submit your order for error checking, and then for processing. We will email you a confirmation within 10 minutes. Another, more detailed confirmation, will follow when we ship your order.

   
We accept Visa, Discover and MasterCard for payment.
We will NOT charge your card until your order is shipped.

 
Branford Bike Online Catalog - Archival Edition
 brought to you by the former owner of Branford Bike, Tim Brockett via his personal web site, TimsLife.Com
This is an archival edition of the Branford Bike web site from February 2006. Complete with product photos, prices, how to articles and technical specifications it is a treasure trove of accurate, detailed and historical information.

In July of 2006 Branford Bike was incinerated by a huge forest fire. No one was hurt but the inventory and buildings were completely destroyed. I witnessed the fire and stayed until the trees were burning in my driveway. At that point I hiked from Branford Bike, through the smoke and embers, down the mountain to my Jeep 3 miles away. I took photos and wrote about the harrowing experience so everyone could see what I saw. My insurance was generous and I later rebuilt my home and started another business selling books. Read the story here.

Branford Bike was a huge part of my life for over 30 years; June 1976 to July 2006. I enjoyed those years tremendously and Branford Bike was often a labor of love. I hope you enjoy browsing through the archival catalog. If your visit brings back pleasant memories please share them with me via e-mail at timbrockett@gmail.com .

If you find any printed Branford Bike catalogs, advertisments or flyers please scan them as a PDF and email. Or you may mail them via US Post to Tim Brockett, PO Box 1711, Emigrant, MT 59027. Eventually I will post them in a Memorabilia catalog section.

Many Thanks and Best Wishes,
Tim Brockett
 
Go to our Secure Ordering Page
For more information, call: (203) 488-0482
Our phone hours are: Monday, Wednesday & Friday, 12 noon - 3 pm Mountain Time

To print this page in Netscape Navigator or Microsoft Explorer:
Choose File from the upper menu bar, click, and then click on Print...