Branford Bike Online Catalog - Archival Edition
 brought to you by the former owner of Branford Bike, Tim Brockett via his personal web site, TimsLife.Com
This is an archival edition of the Branford Bike web site from February 2006. Complete with product photos, prices, how to articles and technical specifications it is a treasure trove of accurate, detailed and historical information. Most of the products are no longer available but if you see something you would like, please contact the new owner of Branford Bike, Rodd Wagner via info@branfordbike.com.

Branford Bike was a huge part of my life for over 30 years. I enjoyed those years tremendously and Branford Bike was often a labor of love. I hope you enjoy browsing through the archival catalog. If your visit brings back pleasant memories please share them with me via e-mail at timbrockett@gmail.com.
Enjoy!
Tim Brockett

The incinerated remains of Branford Bike after the 2006 Big Creek forest fire.
The landscape, house, shop and inventory were completely destroyed by the flames.
 
Branford Bike - Started in June, 1976 Branford Bike
129 Sagittarius Skyway, PO Box 1711, Emigrant, MT 59027 USA
Click on the underlined text to:
order online via our Secure Order Form and receive FREE...
or send us an email  with your questions or comments.
Phone Answering Hours M-W-F, 12 noon - 3 PM Mountain Time
Information: (203) 488-0482  FAX: (203) 643-8078
 
Headset, Seat Posts and Pedals Section: Page 9

Click on an underlined item or scroll down this page to view everything.

- Park Head tube Reaming and Facing Tool -

- Park HTR-1 Accessories -

- Kingsbridge Premium Cutting Oil -

- Headset Parts, Accessories, Tools and Tips -

Order online via our - Secure Order Form - and receive FREE...
 
Headset Cutting Tools
 
Park HTR-1, Head tube Reaming and Facing Tool
Park HTR-1 Tool
 
Park HTR-1 Head tube Reaming and Facing Tool
  • For longest life and smoothest operation headset cups must be perfectly parallel. The Park HTR-1 combines reaming and facing of the head tube to create a perfect, parallel fit for headset cups. The HTR-1 comes with with a 30.0 mm reamer for 1 inch headsets or a 33.8 mm for 1 1/8 inch headsets. Four different size pilots, (29.8mm, 30.0mm, 33.8mm, and 36.8mm) are included with either sized reamer and facer.
  • The optional Park 769 Head tube Reamer Extension extends the cutting depth of the reamers used in 1", 1-1/8" and 1-1/4" headset standards down to 27mm from the head tube face. Designed for head tubes using headsets with deep insertion cups (Chris King SteelSet headsets and others).
Park 751 Reamer for
1 inch head tubes
Park 751 Tool		 Park 769 Reamer
Extender
Park 769 Tool		 Park 754 Reamer for
1 1/18 inch head tubes
Park 754 Tool
 
  • Usually frames need facing more than reaming. Reaming cleans and rounds the inside of your head tube. Facing makes sure that the top and bottom of your head tube is perfectly parallel.
  • The above mentioned pilots are used to keep the Park HTR-1 centered when only facing is desired. Any sized head tube may be faced with the HTR-1 regardless of what reamer size you have, 1 inch (30.0 mm), 1 1/8 inch (33.8 mm) or larger.
  • Note the black button, quick-release, quick-adjust feature on the Park HTR-1 tool. The blue, bottom portion can slide on and off easily. Unlike many other reamers there is no need to unthread the bottom portion. You may also fine tune the bottom portion while using the HTR-1.
  • For a silky smooth operation the centering cone rests on a heavy duty bearing assembly.
  • The Park HTR-1 is a professional quality tool that is easy to use and will last a lifetime.
  • We suggest facing and reaming the top of your head tube first. Then flip your frame over and ream or face the bottom portion.
  • A 30.0 mm reamer is included with HTR-1. Use it for headset cups with 30.2 outside diameter, common on one-inch steering column bikes.
  • You may request a Park HTR-1B in which Park substitutes a 33.8mm reamer for the 30.0 mm reamer. The 33.8 mm reamer is for headset cups of 34.0mm, common on 1-1/8 inch steering column bikes.
  • The most common reason for reaming is to convert a one-inch "JIS" frame to the so-called "Euro" standard, which is best accomplished by the HTR-1 with the 30.0 mm reamer.
  • Reamers and cutters may be purchased separately. Both may also be resharpened by a professional tool cutting service.
  • Visit our Tool Use Tips page 1 to read about Reaming and Facing Tips.
  • Warranty service and help with technical questions is available from Park Tool in Saint Paul, Minnesota USA. Call Park Tool at (651) 777-6868, e-mail them at Info@ParkTool.com or visit them at ParkTool.com by clicking on the underlined text .
Park HTR-1, Head tube Reaming and Facing Tool in use.

Park HTR-1 Tool
 
Part # Description Normal
Retail		 Our Price
USD$		 You
Save
TL-94-00 Park HTR-1, Head tube Reaming and Facing Tool $550.00 $459.88 $90.12
TL-72-53 Park 751 Reamer for 1 inch head tubes $120.00 $99.88 $20.12
TL-73-06 Park 769 Reamer Extender $20.00 $17.88 $2.12
TL-72-53 Park 754 Reamer for 1 1/18 inch head tubes $120.00 $99.88 $20.12
Click on the underlined text to order online via our Secure Order Form.
 
Park Headset Cutting Tool Accessories
 
Park HTR-1 Head tube Reaming and Facing Tool Accessories
  • Park makes a wide variety of reamers that may be used with the HTR-1 tool. All are listed below.
  • We also carry separately Park 36.8mm reamers for headset cups of 37.0mm, common on 1-1/4 inch steering column bikes.
  • The Park 761-S Reaming and Facing Cutters are used to machine head tubes using integrated headsets with a 42 mm bearing and 45 degree angular contact which is the the Campagnolo Hiddenset standard. FSA, ITM and other manufacturers also make headsets in this standard. Includes upper and lower cutters.
  • The Campagnolo Hiddenset standard is different from the IS (Integrated Headset) standard which is used by Cane Creek and others. The Campagnolo standard uses a bearing outside diameter of 42mm, which is larger then the IS standard.
  • Order Park part number 756-S Reaming and facing cutter for integrated headsets that use a 41 mm, 45 degree angular contact bearing, IS standard, such as Cane Creek and some FSA. Includes upper and lower cutters. Must be used with a Park 750 centering cone adapter which is NOT included.
Park 761-S Reamer and
Facer for Campagnolo
Hiddenset standard
Park 761-S		 Park 756-S Reamer and
Facer for Cane Creek
and FSA, IS standard
Park 756-S		 Park 750
Centering Cone
Park 750
 
  • Order Park part number 690-XL oversize, 58 mm, facer for low profile integrated headsets such as Cane Creek, Zero Stack and some FSA. Must be used with a Park 768, 43.8 mm facer pilot, which is NOT included.
  • Order Park part number 758-S reamer and facer for OnePointFive head tubes. Must be used with a Park 750 centering cone adapter which is NOT included.
  • The 750 Centering Cone Adaptor increase the size of the centering cone of the HTR-1 Head tube Reaming and Facing Set. Several headset standards use large head tube inside diameters. The 750 will allow use the HTR-1 with the IS "integrated without cups", the "low profile with cups" and the OnePointFive (1.5") headset standard.
  • We suggest using Kingsbridge premium cutting oil with all cutting tools. Use it liberally for cleanest cuts, ease of operation and maximum tool life.
  • Visit our Tool Use Tips page 1 to read about Reaming and Facing Tips.
  • Warranty service and help with technical questions is available from Park Tool in Saint Paul, Minnesota USA. Call Park Tool at (651) 777-6868, e-mail them at Info@ParkTool.com or visit them at ParkTool.com by clicking on the underlined text .
Park 690-XL Oversized
Facer for low profile
integrated headsets
Park 690-XL		 Park 768 Centering
43.8 mm Pilot for facing low
profile integrated headsets
Park 768		 Park 758-S Reamer and
Facer for Answer
One Point Five frames
Park 758-S
 
Part # Description Normal
Retail		 Our Price
USD$		 You
Save
TL-73-05 Park 761-S Reamer and Facer for
Campagnolo Hiddenset standard		 $350.00 $299.88 $50.12
TL-73-00 Park 756-S Reamer and Facer for
Cane Creek and FSA, IS standard		 $450.00 $399.88 $50.12
TL-73-04 Park 750 Centering Cone $25.00 $19.88 $5.12
TL-73-19 Park 690-XL Oversized Facer for
low profile integrated headsets		 $125.00 $99.88 $25.12
TL-72-99 Park 768 Centering 43.8 mm Pilot
for facing low profile integrated headsets		 $40.00 $35.88 $4.12
TL-73-02 Park 758-S Reamer and Facer for
Answer One Point Five frames		 $350.00 $299.88 $50.12
Click on the underlined text to order online via our Secure Order Form.
 
Kingsbridge Premium Cutting Oil
 
Kingsbridge Cutting Oil
 
Kingsbridge Professional Cutting Tool Oil:
  • A premium quality oil that is easy to use and will help your tools last a lifetime.
  • Two blends; one for steel and titanium frames and another for aluminum frames.
  • Specifically designed for tapping and cutting tools.
  • Non-foaming; clings to surfaces and greatly reduces friction for clean and easy cutting.
  • Able to withstand heat buildup which is common as cutting tools wear.
  • Use this fine cutting oil liberally for maximum tool life.
  • A handy brush is built into the cap and makes an excellent oil applicator.
  • Large, 16 ounce can, will last for years.
  • Proudly made in the USA by Kingsbridge Cycle.
Part
Number		 Description Our Price
USD$		 Normal
Retail		 You
Save
LU-90-KS Kingsbridge Steel Cutting Oil $17.88 $20.00 $ 2.12
LU-90-KA Kingsbridge Aluminum Cutting Oil $17.88 $20.00 $ 2.12
Click on the underlined text to order online via our Secure Order Form.
 
Campagnolo Headset Parts, Tools, Maintenance and Tool Use Tips:
 
 
 
100% Satisfaction Guaranteed

At Branford Bike we want you to be happy and satisfied with everything you purchase from us. We understand that sometimes you will need to return a product because it was not quite what you wanted. You may return anything you purchase from us within 60 days and unused, for an immediate exchange or refund.
 
Click on the underlined text to go to the...

Page 8
Headset Maintenance Tools
Headsets
Table of Contents
Branford Bike Catalog
Main Table of Contents
Page 10
Featuring Fork Cutting Tools
Branford Bike Catalog Index
Quickly find an item or see everything that is in our catalog.
 
 
Order Online via our Secure Order Form

and receive FREE expedited processing with email confirmations.

Our Secure Order Form is easy to use. Simply fill in the boxes as you would for a traditional paper catalog order form.

Our Secure Order Form opens in a separate window that you may resize and tile behind our online catalog. After filling in your name, address and card information you may leave the order window open. Browse through our catalog and when you wish to purchase an item simply "cut and paste" the part number and description to the appropriate order form boxes.

When you are done shopping, submit your order for error checking, and then for processing. We will email you a confirmation within 10 minutes. Another, more detailed confirmation, will follow when we ship your order.

   
We accept Visa, Discover and MasterCard for payment.
We will NOT charge your card until your order is shipped.

Go to our Secure Ordering Page
Our order form no longer loads because this is an archival catalog.
For more information, call: (203) 488-0482
Our phone hours are: Monday, Wednesday & Friday, 12 noon - 3 pm Mountain Time

To print this page:
Use your browser's Print command or
press Ctrl + P on Windows, or Command + P on Mac.