• The computer pictured above shows a current speed of 36.8 kilometers per hour, a cadence of 111 rpms, a time of 1:43 and 45 seconds, and a total distance ridden of 35.79 kilometers. The display can be set to miles per hour also.
• A user friendly, single transmitter collects information from your rear wheel and crank and sends it to a handlebar mounted computer. The handlebar unit is pictured above to your left and the chainstay mounted transmitter is to your right.
• Designed for road bicycles but will work fine with almost any traditonal frame bicycle.
• Will not work on bicycles that have pivoting chainstays or bicycles that do not allow the pedal or crank arm to overlap the rear tire.
• The black arms on the transmitter are sensors and pick up signals via two magnets; one zip-tied to your crank arm and another magnet mounted on a rear wheel spoke. The arms pivot and are adjustable towards or away from your crank arm or rear wheel.
• The transmitter unit can be placed anywhere along the top of your left chainstay. A crank arm magnet must pass by the notch on the forward arm. A spoke mounted magnet must pass by the notch on the rear arm. Both notches are marked by red arrows in the above photo. The distance between the notches is 2.75 inches (7cm) and is NOT adjustable.
  The arrow on the upper left hand corner of the transmitter must point towards the handlebar mounted computer.
• The computer head should be placed at least 20cm (4 inches) away from the transmitter but no more than 100cm (40 inches) away. An obstacle free transmission path is NOT required.
• Adjustable handlebar mount fits normal and oversized bars up to 32 mm in diameter.
  No-tools, high powered speed magnet fits bladed and round wire spokes.
• The large,1 inch by 1 1/8 inch (2.54 cm by 2.90 cm) screen is divided into three sections. The upper left is for speed functions, the upper right for cadence functions and the lower half for time, distance, max and average speed and lap funtions.
• Displays pedal revolutions per minute (cadence) for optimal training.
• Current, total, maximum and average cadence can be displayed.
• Computer head size is 1.5 inches (3.8 cm) wide by 2 and 1/4 inches (5.2 cm) tall.
• Comes with a rear wheel and crank sensor kit; ideal for use with a Wind Trainer.
• Cycling functions include: cadence (pedal RPM's), cumulative distance, trip distance, current, maximum and average speed in miles or kilometers per hour. Speed reads up to 65 miles or 106 kilometers per hour. Cadence reads to 299 rpms.
• Time functions include: 24 hour clock and time elapsed on your current ride, up to 10 hours. Cumulative time for all rides is stored up to 9,999 hours.
• Extra functions include auto time, auto sleep and resettable odometer memory so you never lose those hard earned miles when changing the batteries.
• Auto time automatically starts and stops the timer when you start or stop riding. Auto time assures you of the greatest possible accuracy for elapsed time and average speed functions.
• Auto Sleep is a power saving feature that automatically shuts off the liquid crystal display, except for time, after one hour of non-use.
• You may store up to 50 laps with this fine computer. Average speed, average cadence, time and distance for each lap is recorded and may be displayed. Ideal for criterium racing or training on a repetitive course.
• Extra memory allows you to store two tire sizes and the ability to switch this computer between two bicycles. Elapsed time, trip distance and average speed for your second bike are stored separately from the same information from your first bike.
• Comes with 4 lithium long life CR-2032 batteries, zip ties, transmitter and handlebar bracket, printed manual and all required hardware.
• Two batteries are used for the computer and two for the transmitter. If used for one hour a day, seven days a week, the batteries will last about six months.
• The transmitter uses a coded signal to eliminate second rider interference.
• Waterproof and lightweight. Only 87 grams!
• Available in gloss black with chrome trim.
• Professional repairs, warranty service and help with technical questions is available from Cateye USA in Boulder, Colorado USA. Call Cateye USA at 800-522-8393, email them at Service@Cateye.com or visit them at Cateye.com by clicking on the underlined text .
• Official product manuals and more product information is also available at Cateye.com .
  The product manuals may be downloaded. They are in Adobe PDF format and require Adobe Acrobat Reader 4.0 or higher to read or print.

• New, extra large and fully programmable screen.
• New programmable odometer set option; easily reset mileage loss when changing the battery.
• Extra memory allows you to store two, user programmable, precise wheel sizes; one for race and one for training wheels. Exact wheel circumference will vary between different brands, widths and types of tires.
• Two wheel settings allows you to switch this computer between two bikes. Extra mounting brackets are listed below.
• Easy to use, quick release handlebar mount fits up to 31.8 mm diameter bars.
• Optional Aero Fork attachment included.
• No tools, single spoke magnet, fits round, aero and bladed single spokes.
• Cycling functions include: current speed, cumulative distance, trip distance one and trip distance two, maximum speed and average speed in miles or kilometers per hour.
• Pace arrow graphically shows if you are above or below your average speed.
• Dual Trip Distance; measures from start to end of your current ride and one smaller segment within your current ride.
• Time functions include: 24 hour clock and time elapsed on your current ride, up to 10 hours.
• Extra functions include auto time and auto sleep.
• Auto time automatically starts and stops the timer when you start or stop riding. Auto time assures you of the greatest possible accuracy for elapsed time and average speed functions.
• Auto Sleep is a power saving feature that automatically shuts off the liquid crystal display, except for time, after one hour of non-use.
• Sleek, flat black back with a brushed silver face. Waterproof and lightweight. Only 52 grams!
• Comes with a CR-2032 battery, zip ties, front wheel sensor and handlebar bracket, printed manual and all required hardware.
• Professional repairs, warranty service and help with technical questions is available from Cateye USA in Boulder, Colorado USA. Call Cateye USA at 800-522-8393, email them at Service@Cateye.com or visit them at Cateye.com by clicking on the underlined text .
• Official product manuals and more product information is also available at Cateye.com .
  The product manuals may be downloaded. They are in Adobe PDF format and require Adobe Acrobat Reader 4.0 or higher to read or print.

• Allows you to put handlebar mounted accessories above, below or in front of your handlebars. Mounts on your handlebars, stem or even your seatpost. The extension arm pivots 180 degrees.
• Two sizes are available. Both employ a 140 mm (5.6 inches) extension measured from the center of the bar clamp to the center of the horizontal accessory bar.
  The small Swing Grip comes with a 100 mm (4 inches) horizontal accessory bar while the large size has a 130 mm (5.1 inches) horizontal bar.
• Both sizes are available in satin silver or gloss black.
• Fits all road or MTB handlebars from 22mm (7/8 of an inch) to 35mm (1 3/8 of an inch) in diameter. May also be clamped to seatposts and larger frame tubes. Ideal for extra tail lights.

• Both horizontal accessory mounting bars may be adjusted side to side by 20 mm ( 3/4 of an inch). The 100 mm bar will hold two bar mounted accessories while the 130 will hold three.
• The horizontal accessory mounting bar may be rotated 360 degrees in 90 degree increments which makes the Swing Grip ideal for recumbents or non-bicycle applications. The extension bar pivots or swings 180 degrees. It may be locked in any position by simply tightening a 3mm allen bolt.
• Stainless steel clamp band, anodized silver or enameled black, alloy tube and carbon/plastic extension are well made and exceptionally durable.
• Easy to install. Requires a 3 mm allen wrench and a Phillips screwdriver. The allen wrench is included.
• Weighs only 91 or 97 grams.
• Warranty service and help with technical questions is available from the official Minoura USA Service Center in Hayward, California. Call them at (510) 538-8599 or email them at MinouraUSA@ATTGlobal.Net by clicking on the underlined text .
• More product information is also available at the Official Minoura Web Site in Japan.
  Minoura product manuals may be downloaded. They are in Adobe PDF format and require Adobe Acrobat Reader 4.0 or higher to read or print.

All of the computers we carry come as complete units; you do not need to purchase anything extra for standard bicycle applications. However, if you would like to set your computer up for a non-standard application or just need extra parts we have them. Choose what you need from the items listed below.

• Front wheel sensor kit with an adjustable handlebar bracket and standard gauge wire. 27 inch, (70 cm) wire. Fits bars up to 31.8 mm in diameter. Fits Cateye OS 1.0 and OS 1.1 computers. Comes with a front fork sensor attachment kit and clear zip ties. You will still need a spoke magnet if you are using this kit for a second bike. Note the two silver contacts in the middle of the computer bar mount.
  CY-31-00 $24.88
  

• Front wheel sensor kit with an adjustable handlebar bracket and standard gauge wire. 27 inch, (70 cm) wire. Fits bars up to 31.8 mm in diameter. Fits models: Heart Rate Monitor HB-100, Altimeter AT-100, Kosmos ST-300, Mity 3 MT-300, Mity 8 MT-400, Enduro 2 ED-200, Enduro 8 ED300 and Velo 2 VL-200. Comes with a front fork sensor attachment kit and clear zip ties. You will still need a spoke magnet if you are using this kit for a second bike. Note the two silver contacts at opposite corners on the computer mount face.
  CY-35-51 $14.88
  

• Front wheel sensor kit with an adjustable handlebar bracket and a heavy duty cable. 27 inch, (70 cm) wire. Fits bars up to 31.8 mm in diameter. Fits models: Heart Rate Monitor HB-100, Altimeter AT-100, Kosmos ST-300, Mity 3 MT-300, Velo 2 VL-200, Enduro 2 ED-200 and Enduro 8 ED300. Comes with a front fork sensor attachment kit, extra cable protector, and clear zip ties. You will still need a spoke magnet if you are using this kit for a second bike. Note the two silver contacts at opposite corners on the computer mount face. Designed for off road riding.
  CY-35-54 $14.88
  
• Rear wheel sensor kit with an adjustable handlebar bracket and standard gauge wire. 55 inch, (140 cm) wire. Fits bars up to 31.8 mm in diameter. Fits models: Heart Rate Monitor HB-100, Altimeter AT-100, Kosmos ST-300, Mity 3 MT-300, Velo 2 VL-200, Mity 8 MT-400, Enduro 2 ED-200 and Enduro 8 ED300. Comes with a rear chainstay sensor attachment kit and clear zip ties. You will still need a spoke magnet if you are using this kit for a second bike.
  CY-35-50 $16.88
  

• Rear wheel sensor kit with a straight handlebar bracket. 27 inch, (70 cm) wire. Fits Mity and Mity 2 MT-100 and MT-200 and normal 26.0 mm diameter bars only. Front wheel units are no longer available. You may use a rear wheel unit on a front wheel. Comes with a rear chainstay sensor attachment kit and clear zip ties. You will still need a spoke magnet if you are using this kit for a second bike.Note the two side by side silver contacts on the computer mount face.
  CY-36-00 $14.88
  


• Rear wheel sensor kit with cadence sensor and an adjustable handlebar bracket. 55 inch, (140 cm) wire. Fits bars up to 31.8 mm in diameter. Fits Astrale CD-100 and Astrale 8 CD200. Comes with two rear chainstay sensor attachment kits and clear zip ties. You will still need a spoke magnet if you are using this kit for a second bike. Note the three silver contacts on the computer mount face.
  CY-35-48 $19.88
  
  


• Straight handlebar bracket only - fits the Cordless II CL-200 and Cordless 7 CL300. Fits bars up to 31.8 mm in diameter.
  CY-35-53 $5.88
  
  

• Cronometro NOB. A universal computer mount that fits on ALL mountain or road stems or handlebars including clip on aero style bars. Allows the computer head to be mounted 90 degrees to what the original bracket was designed for. Tightens like a hose clamp; note the screw at the bottom.
  HB-31-60 $12.88




• Cordless II CL-200 front wheel sensor kit with a fork mounted bracket. If you are using this for a second bike you will still need a wheel magnet and a handlebar mount.
  CY-35-17 $29.88
  
  


• Cordless II CL-200 and Cordless 8 CL-300 front wheel sensor kit with a fork mounted bracket. If you are using this for a second bike you will still need a wheel magnet and a handlebar mount.
  CY-35-52 $29.88
  
  

• Extra replacement battery. Fits models: Heart Rate Monitor HB-100, Altimeter AT-100, Cordless II CL-200, Cordless 7 CL300, Astrale CD-100, Astrale 8 CD200, Kosmos ST-300, Mity 3 MT-300, Mity 8 MT400, Velo 2 VL-200, Enduro 2 ED-200, Enduro 8 ED300, Double Wireless, OS 1.0 and OS 1.1.
  BA-10-10 $4.88
• Extra replacement battery. Fits models: Mity MT-100, Mity 2 MT-200 and Enduro 1 ST-250.
  BA-10-16 $4.88
  
  

• Extra wheel magnet, fits a front or a rear wheel and single round, aero or bladed spoke. Fits ALL models except the Cordless II CL-200, Cordless 7 CL-300, Double Wireless, OS 1.0 and OS 1.1. Note the grey colored magnet.
  CY-35-43 $9.88
  
  



• A more powerful, single spoke wheel magnet. Fits a front or rear wheel and single round, aero or bladed spoke. May be used with ALL Cateye models; required for the Cordless II CL-200, Cordless 7 CL300, Double Wireless, OS 1.0 and OS 1.1. May also be used with the Campagnolo ErgoBrain computers. Note the silver colored magnet.
  CY-31-10 $19.88
  
  



• Cadence magnet for the Astrale CD-100, Astrale 8 CD-200, Double Wireless and Campagnolo ErgoBrain. Adhesive backed, fits on the left crank arm and secures with a zip tie which is included. Can also be used as a disc or bladed wheel magnet. Ideal for motorized applications like motorcycles, Karts, etc. Note the slot at the bottom which the zip tie threads through and securely holds this magnet in place.
  CY-32-08 $4.88
  
  



• This universal mounting clamp set fits all forks and chain stays. May be used with all Cateye and Campagnolo ErgoBrain computers. Bands are notched and adjust like a hose clamp. Securely holds any front or rear sensor wand.
  CY-35-35 $4.88
  
  

At Branford Bike we want you to be happy and satisfied with everything you purchase from us. We understand that sometimes you will need to return a product because it was not quite what you wanted. You may return anything you purchase from us within 60 days and unused, for an immediate exchange or refund.

Our Secure Order Form is easy to use. Simply fill in the boxes as you would for a traditional paper catalog order form.

Our Secure Order Form opens in a separate window that you may resize and tile behind our online catalog. After filling in your name, address and card information you may leave the order window open. Browse through our catalog and when you wish to purchase an item simply "cut and paste" the part number and description to the appropriate order form boxes.

When you are done shopping, submit your order for error checking, and then for processing. We will email you a confirmation within 10 minutes. Another, more detailed confirmation, will follow when we ship your order.

   
We accept Visa, Discover and MasterCard for payment.
We will NOT charge your card until your order is shipped.

To print this page in Netscape Navigator or Microsoft Explorer:
Choose File from the upper menu bar, click, and then click on Print...